#!/usr/bin/perl -wT
# -*- Mode: perl; indent-tabs-mode: nil -*-
#
# The contents of this file are subject to the Mozilla Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code is the Bugzilla Bug Tracking System.
#
# The Initial Developer of the Original Code is Netscape Communications
# Corporation. Portions created by Netscape are
# Copyright (C) 1998 Netscape Communications Corporation. All
# Rights Reserved.
#
# Contributor(s): Terry Weissman <terry@mozilla.org>
# Dan Mosedale <dmose@mozilla.org>
# Dave Miller <justdave@syndicomm.com>
# Christopher Aillon <christopher@aillon.com>
# Myk Melez <myk@mozilla.org>
# Jeff Hedlund <jeff.hedlund@matrixsi.com>
# Frédéric Buclin <LpSolit@gmail.com>
# Lance Larsh <lance.larsh@oracle.com>
# Implementation notes for this file:
#
# 1) the 'id' form parameter is validated early on, and if it is not a valid
# bugid an error will be reported, so it is OK for later code to simply check
# for a defined form 'id' value, and it can assume a valid bugid.
#
# 2) If the 'id' form parameter is not defined (after the initial validation),
# then we are processing multiple bugs, and @idlist will contain the ids.
#
# 3) If we are processing just the one id, then it is stored in @idlist for
# later processing.
use strict;
my $UserInEditGroupSet = -1;
my $UserInCanConfirmGroupSet = -1;
my $PrivilegesRequired = 0;
my $lastbugid = 0;
use lib qw(.);
require "globals.pl";
use Bugzilla;
use Bugzilla::Constants;
use Bugzilla::Bug;
use Bugzilla::BugMail;
use Bugzilla::User;
use Bugzilla::Util;
use Bugzilla::Field;
use Bugzilla::Product;
# Use the Flag module to modify flag data if the user set flags.
use Bugzilla::Flag;
use Bugzilla::FlagType;
# Shut up misguided -w warnings about "used only once":
use vars qw(@legal_product
%components
%legal_opsys
%legal_platform
%legal_priority
%settable_resolution
%target_milestone
%legal_severity
);
my $user = Bugzilla->login(LOGIN_REQUIRED);
my $whoid = $user->id;
my $grouplist = $user->groups_as_string;
my $cgi = Bugzilla->cgi;
my $dbh = Bugzilla->dbh;
my $template = Bugzilla->template;
my $vars = {};
my $requiremilestone = 0;
######################################################################
# Subroutines
######################################################################
sub BugInGroupId {
my ($bug_id, $group_id) = @_;
detaint_natural($bug_id);
detaint_natural($group_id);
my ($in_group) = Bugzilla->dbh->selectrow_array(
"SELECT CASE WHEN bug_id != 0 THEN 1 ELSE 0 END
FROM bug_group_map
WHERE bug_id = ? AND group_id = ?", undef, ($bug_id, $group_id));
return $in_group;
}
######################################################################
# Begin Data/Security Validation
######################################################################
# Create a list of IDs of all bugs being modified in this request.
# This list will either consist of a single bug number from the "id"
# form/URL field or a series of numbers from multiple form/URL fields
# named "id_x" where "x" is the bug number.
# For each bug being modified, make sure its ID is a valid bug number
# representing an existing bug that the user is authorized to access.
my @idlist;
if (defined $cgi->param('id')) {
my $id = $cgi->param('id');
ValidateBugID($id);
# Store the validated, and detainted id back in the cgi data, as
# lots of later code will need it, and will obtain it from there
$cgi->param('id', $id);
push @idlist, $id;
} else {
foreach my $i ($cgi->param()) {
if ($i =~ /^id_([1-9][0-9]*)/) {
my $id = $1;
ValidateBugID($id);
push @idlist, $id;
}
}
}
# Make sure there are bugs to process.
scalar(@idlist) || ThrowUserError("no_bugs_chosen");
# Make sure form param 'dontchange' is defined so it can be compared to easily.
$cgi->param('dontchange','') unless defined $cgi->param('dontchange');
# Make sure the 'knob' param is defined; else set it to 'none'.
$cgi->param('knob', 'none') unless defined $cgi->param('knob');
# Validate all timetracking fields
foreach my $field ("estimated_time", "work_time", "remaining_time") {
if (defined $cgi->param($field)) {
my $er_time = trim($cgi->param($field));
if ($er_time ne $cgi->param('dontchange')) {
Bugzilla::Bug::ValidateTime($er_time, $field);
}
}
}
if (UserInGroup(Param('timetrackinggroup'))) {
my $wk_time = $cgi->param('work_time');
if ($cgi->param('comment') =~ /^\s*$/ && $wk_time && $wk_time != 0) {
ThrowUserError('comment_required');
}
}
ValidateComment(scalar $cgi->param('comment'));
# If the bug(s) being modified have dependencies, validate them
# and rebuild the list with the validated values. This is important
# because there are situations where validation changes the value
# instead of throwing an error, f.e. when one or more of the values
# is a bug alias that gets converted to its corresponding bug ID
# during validation.
foreach my $field ("dependson", "blocked") {
if ($cgi->param('id')) {
my $bug = new Bugzilla::Bug($cgi->param('id'), $user->id);
my @old = @{$bug->$field};
my @new;
foreach my $id (split(/[\s,]+/, $cgi->param($field))) {
next unless $id;
ValidateBugID($id, $field);
push @new, $id;
}
$cgi->param($field, join(",", @new));
my ($added, $removed) = Bugzilla::Util::diff_arrays(\@old, \@new);
foreach my $id (@$added , @$removed) {
# ValidateBugID is called without $field here so that it will
# throw an error if any of the changed bugs are not visible.
ValidateBugID($id);
if (Param("strict_isolation")) {
my $deltabug = new Bugzilla::Bug($id, $user->id);
if (!$user->can_edit_product($deltabug->{'product_id'})) {
$vars->{'field'} = $field;
ThrowUserError("illegal_change_deps", $vars);
}
}
}
if ((@$added || @$removed)
&& (!CheckCanChangeField($field, $bug->bug_id, 0, 1))) {
$vars->{'privs'} = $PrivilegesRequired;
$vars->{'field'} = $field;
ThrowUserError("illegal_change", $vars);
}
} else {
# Bugzilla does not support mass-change of dependencies so they
# are not validated. To prevent a URL-hacking risk, the dependencies
# are deleted for mass-changes.
$cgi->delete($field);
}
}
# do a match on the fields if applicable
# The order of these function calls is important, as both Flag::validate
# and FlagType::validate assume User::match_field has ensured that the values
# in the requestee fields are legitimate user email addresses.
&Bugzilla::User::match_field($cgi, {
'qa_contact' => { 'type' => 'single' },
'newcc' => { 'type' => 'multi' },
'masscc' => { 'type' => 'multi' },
'assigned_to' => { 'type' => 'single' },
'^requestee(_type)?-(\d+)$' => { 'type' => 'multi' },
});
# Validate flags in all cases. validate() should not detect any
# reference to flags if $cgi->param('id') is undefined.
Bugzilla::Flag::validate($cgi, $cgi->param('id'));
Bugzilla::FlagType::validate($cgi, $cgi->param('id'));
######################################################################
# End Data/Security Validation
######################################################################
print $cgi->header();
$vars->{'title_tag'} = "bug_processed";
# Set the title if we can see a mid-air coming. This test may have false
# negatives, but never false positives, and should catch the majority of cases.
# It only works at all in the single bug case.
if (defined $cgi->param('id')) {
SendSQL("SELECT delta_ts FROM bugs WHERE bug_id = " .
$cgi->param('id'));
my $delta_ts = FetchOneColumn();
if (defined $cgi->param('delta_ts') && $cgi->param('delta_ts') ne $delta_ts)
{
$vars->{'title_tag'} = "mid_air";
}
}
# Set up the vars for nagiavtional <link> elements
my @bug_list;
if ($cgi->cookie("BUGLIST") && defined $cgi->param('id')) {
@bug_list = split(/:/, $cgi->cookie("BUGLIST"));
$vars->{'bug_list'} = \@bug_list;
}
GetVersionTable();
foreach my $field_name ('product', 'component', 'version') {
defined($cgi->param($field_name))
|| ThrowCodeError('undefined_field', { field => $field_name });
}
# This function checks if there is a comment required for a specific
# function and tests, if the comment was given.
# If comments are required for functions is defined by params.
#
sub CheckonComment {
my ($function) = (@_);
# Param is 1 if comment should be added !
my $ret = Param( "commenton" . $function );
# Allow without comment in case of undefined Params.
$ret = 0 unless ( defined( $ret ));
if( $ret ) {
if (!defined $cgi->param('comment')
|| $cgi->param('comment') =~ /^\s*$/) {
# No comment - sorry, action not allowed !
ThrowUserError("comment_required");
} else {
$ret = 0;
}
}
return( ! $ret ); # Return val has to be inverted
}
# Figure out whether or not the user is trying to change the product
# (either the "product" variable is not set to "don't change" or the
# user is changing a single bug and has changed the bug's product),
# and make the user verify the version, component, target milestone,
# and bug groups if so.
my $oldproduct = '';
if (defined $cgi->param('id')) {
SendSQL("SELECT name FROM products INNER JOIN bugs " .
"ON products.id = bugs.product_id WHERE bug_id = " .
$cgi->param('id'));
$oldproduct = FetchSQLData();
}
if (((defined $cgi->param('id') && $cgi->param('product') ne $oldproduct)
|| (!$cgi->param('id')
&& $cgi->param('product') ne $cgi->param('dontchange')))
&& CheckonComment( "reassignbycomponent" ))
{
# Check to make sure they actually have the right to change the product
if (!CheckCanChangeField('product', scalar $cgi->param('id'), $oldproduct,
$cgi->param('product'))) {
$vars->{'oldvalue'} = $oldproduct;
$vars->{'newvalue'} = $cgi->param('product');
$vars->{'field'} = 'product';
$vars->{'privs'} = $PrivilegesRequired;
ThrowUserError("illegal_change", $vars);
}
my $prod = $cgi->param('product');
my $prod_obj = new Bugzilla::Product({name => $prod});
trick_taint($prod);
# If at least one bug does not belong to the product we are
# moving to, we have to check whether or not the user is
# allowed to enter bugs into that product.
# Note that this check must be done early to avoid the leakage
# of component, version and target milestone names.
my $check_can_enter =
$dbh->selectrow_array("SELECT 1 FROM bugs
INNER JOIN products
ON bugs.product_id = products.id
WHERE products.name != ?
AND bugs.bug_id IN
(" . join(',', @idlist) . ") " .
$dbh->sql_limit(1),
undef, $prod);
if ($check_can_enter) { $user->can_enter_product($prod, 1) }
# note that when this script is called from buglist.cgi (rather
# than show_bug.cgi), it's possible that the product will be changed
# but that the version and/or component will be set to
# "--dont_change--" but still happen to be correct. in this case,
# the if statement will incorrectly trigger anyway. this is a
# pretty weird case, and not terribly unreasonable behavior, but
# worthy of a comment, perhaps.
#
my @version_names = map($_->name, @{$prod_obj->versions});
my $vok = lsearch(\@version_names, $cgi->param('version')) >= 0;
my $cok = lsearch($::components{$prod}, $cgi->param('component')) >= 0;
my $mok = 1; # so it won't affect the 'if' statement if milestones aren't used
if ( Param("usetargetmilestone") ) {
defined($cgi->param('target_milestone'))
|| ThrowCodeError('undefined_field', { field => 'target_milestone' });
$mok = lsearch($::target_milestone{$prod},
$cgi->param('target_milestone')) >= 0;
}
# If the product-specific fields need to be verified, or we need to verify
# whether or not to add the bugs to their new product's group, display
# a verification form.
if (!$vok || !$cok || !$mok || (AnyDefaultGroups()
&& !defined $cgi->param('addtonewgroup'))) {
if (!$vok || !$cok || !$mok) {
$vars->{'verify_fields'} = 1;
my %defaults;
# We set the defaults to these fields to the old value,
# if its a valid option, otherwise we use the default where
# that's appropriate
$vars->{'versions'} = \@version_names;
if ($vok) {
$defaults{'version'} = $cgi->param('version');
}
$vars->{'components'} = $::components{$prod};
if ($cok) {
$defaults{'component'} = $cgi->param('component');
}
if (Param("usetargetmilestone")) {
$vars->{'use_target_milestone'} = 1;
$vars->{'milestones'} = $::target_milestone{$prod};
if ($mok) {
$defaults{'target_milestone'} = $cgi->param('target_milestone');
} else {
SendSQL("SELECT defaultmilestone FROM products " .
"WHERE name = " . SqlQuote($prod));
$defaults{'target_milestone'} = FetchOneColumn();
}
}
else {
$vars->{'use_target_milestone'} = 0;
}
$vars->{'defaults'} = \%defaults;
}
else {
$vars->{'verify_fields'} = 0;
}
$vars->{'verify_bug_group'} = (AnyDefaultGroups()
&& !defined $cgi->param('addtonewgroup'));
$template->process("bug/process/verify-new-product.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
exit;
}
}
# Checks that the user is allowed to change the given field. Actually, right
# now, the rules are pretty simple, and don't look at the field itself very
# much, but that could be enhanced.
my $ownerid;
my $reporterid;
my $qacontactid;
################################################################################
# CheckCanChangeField() defines what users are allowed to change what bugs. You
# can add code here for site-specific policy changes, according to the
# instructions given in the Bugzilla Guide and below. Note that you may also
# have to update the Bugzilla::Bug::user() function to give people access to the
# options that they are permitted to change.
#
# CheckCanChangeField() should return true if the user is allowed to change this
# field, and false if they are not.
#
# The parameters to this function are as follows:
# $field - name of the field in the bugs table the user is trying to change
# $bugid - the ID of the bug they are changing
# $oldvalue - what they are changing it from
# $newvalue - what they are changing it to
#
# Note that this function is currently not called for dependency changes
# (bug 141593) or CC changes, which means anyone can change those fields.
#
# Do not change the sections between START DO_NOT_CHANGE and END DO_NOT_CHANGE.
################################################################################
sub CheckCanChangeField {
# START DO_NOT_CHANGE
my ($field, $bugid, $oldvalue, $newvalue) = (@_);
$oldvalue = defined($oldvalue) ? $oldvalue : '';
$newvalue = defined($newvalue) ? $newvalue : '';
# Return true if they haven't changed this field at all.
if ($oldvalue eq $newvalue) {
return 1;
} elsif (trim($oldvalue) eq trim($newvalue)) {
return 1;
# numeric fields need to be compared using ==
} elsif (($field eq "estimated_time" || $field eq "remaining_time")
&& $newvalue ne $cgi->param('dontchange')
&& $oldvalue == $newvalue)
{
return 1;
}
# A resolution change is always accompanied by a status change. So, we
# always OK resolution changes; if they really can't do this, we will
# notice it when status is checked.
if ($field eq "resolution") {
return 1;
}
# END DO_NOT_CHANGE
# Allow anyone to change comments.
if ($field =~ /^longdesc/) {
return 1;
}
# Ignore the assigned_to field if the bug is not being reassigned
if ($field eq "assigned_to"
&& $cgi->param('knob') ne "reassignbycomponent"
&& $cgi->param('knob') ne "reassign")
{
return 1;
}
# START DO_NOT_CHANGE
# Find out whether the user is a member of the "editbugs" and/or
# "canconfirm" groups. $UserIn*GroupSet are caches of the return value of
# the UserInGroup calls.
if ($UserInEditGroupSet < 0) {
$UserInEditGroupSet = UserInGroup("editbugs");
}
if ($UserInCanConfirmGroupSet < 0) {
$UserInCanConfirmGroupSet = UserInGroup("canconfirm");
}
# END DO_NOT_CHANGE
# If the user isn't allowed to change a field, we must tell him who can.
# We store the required permission set into the $PrivilegesRequired
# variable which gets passed to the error template.
#
# $PrivilegesRequired = 0 : no privileges required;
# $PrivilegesRequired = 1 : the reporter, assignee or an empowered user;
# $PrivilegesRequired = 2 : the assignee or an empowered user;
# $PrivilegesRequired = 3 : an empowered user.
# Allow anyone with "editbugs" privs to change anything.
if ($UserInEditGroupSet) {
return 1;
}
# *Only* users with "canconfirm" privs can confirm bugs.
if ($field eq "canconfirm"
|| ($field eq "bug_status"
&& $oldvalue eq 'UNCONFIRMED'
&& IsOpenedState($newvalue)))
{
$PrivilegesRequired = 3;
return $UserInCanConfirmGroupSet;
}
# START DO_NOT_CHANGE
# $reporterid, $ownerid and $qacontactid are caches of the results of
# the call to find out the assignee, reporter and qacontact of the current bug.
if ($lastbugid != $bugid) {
SendSQL("SELECT reporter, assigned_to, qa_contact FROM bugs
WHERE bug_id = $bugid");
($reporterid, $ownerid, $qacontactid) = (FetchSQLData());
$lastbugid = $bugid;
}
# END DO_NOT_CHANGE
# Allow the assignee to change anything else.
if ($ownerid == $whoid) {
return 1;
}
# Allow the QA contact to change anything else.
if (Param('useqacontact') && $qacontactid && ($qacontactid == $whoid)) {
return 1;
}
# At this point, the user is either the reporter or an
# unprivileged user. We first check for fields the reporter
# is not allowed to change.
# The reporter may not:
# - reassign bugs, unless the bugs are assigned to him;
# in that case we will have already returned 1 above
# when checking for the assignee of the bug.
if ($field eq "assigned_to") {
$PrivilegesRequired = 2;
return 0;
}
# - change the QA contact
if ($field eq "qa_contact") {
$PrivilegesRequired = 2;
return 0;
}
# - change the target milestone
if ($field eq "target_milestone") {
$PrivilegesRequired = 2;
return 0;
}
# - change the priority (unless he could have set it originally)
if ($field eq "priority"
&& !Param('letsubmitterchoosepriority'))
{
$PrivilegesRequired = 2;
return 0;
}
# The reporter is allowed to change anything else.
if ($reporterid == $whoid) {
return 1;
}
# If we haven't returned by this point, then the user doesn't
# have the necessary permissions to change this field.
$PrivilegesRequired = 1;
return 0;
}
# Confirm that the reporter of the current bug can access the bug we are duping to.
sub DuplicateUserConfirm {
# if we've already been through here, then exit
if (defined $cgi->param('confirm_add_duplicate')) {
return;
}
# Remember that we validated both these ids earlier, so we know
# they are both valid bug ids
my $dupe = $cgi->param('id');
my $original = $cgi->param('dup_id');
SendSQL("SELECT reporter FROM bugs WHERE bug_id = $dupe");
my $reporter = FetchOneColumn();
my $rep_user = Bugzilla::User->new($reporter);
if ($rep_user->can_see_bug($original)) {
$cgi->param('confirm_add_duplicate', '1');
return;
}
SendSQL("SELECT cclist_accessible FROM bugs WHERE bug_id = $original");
$vars->{'cclist_accessible'} = FetchOneColumn();
# Once in this part of the subroutine, the user has not been auto-validated
# and the duper has not chosen whether or not to add to CC list, so let's
# ask the duper what he/she wants to do.
$vars->{'original_bug_id'} = $original;
$vars->{'duplicate_bug_id'} = $dupe;
# Confirm whether or not to add the reporter to the cc: list
# of the original bug (the one this bug is being duped against).
print Bugzilla->cgi->header();
$template->process("bug/process/confirm-duplicate.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
exit;
}
if (defined $cgi->param('id')) {
# since this means that we were called from show_bug.cgi, now is a good
# time to do a whole bunch of error checking that can't easily happen when
# we've been called from buglist.cgi, because buglist.cgi only tweaks
# values that have been changed instead of submitting all the new values.
# (XXX those error checks need to happen too, but implementing them
# is more work in the current architecture of this script...)
my $prod_obj = Bugzilla::Product::check_product($cgi->param('product'));
check_field('component', scalar $cgi->param('component'),
\@{$::components{$cgi->param('product')}});
check_field('version', scalar $cgi->param('version'),
[map($_->name, @{$prod_obj->versions})]);
if ( Param("usetargetmilestone") ) {
check_field('target_milestone', scalar $cgi->param('target_milestone'),
\@{$::target_milestone{$cgi->param('product')}});
}
check_field('rep_platform', scalar $cgi->param('rep_platform'), \@::legal_platform);
check_field('op_sys', scalar $cgi->param('op_sys'), \@::legal_opsys);
check_field('priority', scalar $cgi->param('priority'), \@::legal_priority);
check_field('bug_severity', scalar $cgi->param('bug_severity'), \@::legal_severity);
# Those fields only have to exist. We don't validate their value here.
foreach my $field_name ('bug_file_loc', 'short_desc', 'longdesclength') {
defined($cgi->param($field_name))
|| ThrowCodeError('undefined_field', { field => $field_name });
}
$cgi->param('short_desc', clean_text($cgi->param('short_desc')));
if (trim($cgi->param('short_desc')) eq "") {
ThrowUserError("require_summary");
}
}
my $action = trim($cgi->param('action') || '');
if ($action eq Param('move-button-text')) {
Param('move-enabled') || ThrowUserError("move_bugs_disabled");
$user->is_mover || ThrowUserError("auth_failure", {action => 'move',
object => 'bugs'});
# Moved bugs are marked as RESOLVED MOVED.
my $sth = $dbh->prepare("UPDATE bugs
SET bug_status = 'RESOLVED',
resolution = 'MOVED',
delta_ts = ?
WHERE bug_id = ?");
# Bugs cannot be a dupe and moved at the same time.
my $sth2 = $dbh->prepare("DELETE FROM duplicates WHERE dupe = ?");
my $comment = "";
if (defined $cgi->param('comment') && $cgi->param('comment') !~ /^\s*$/) {
$comment = $cgi->param('comment') . "\n\n";
}
$comment .= "Bug moved to " . Param('move-to-url') . ".\n\n";
$comment .= "If the move succeeded, " . $user->login . " will receive a mail\n";
$comment .= "containing the number of the new bug in the other database.\n";
$comment .= "If all went well, please mark this bug verified, and paste\n";
$comment .= "in a link to the new bug. Otherwise, reopen this bug.\n";
$dbh->bz_lock_tables('bugs WRITE', 'bugs_activity WRITE', 'duplicates WRITE',
'longdescs WRITE', 'profiles READ', 'groups READ',
'bug_group_map READ', 'group_group_map READ',
'user_group_map READ', 'classifications READ',
'products READ', 'components READ', 'votes READ',
'cc READ', 'fielddefs READ');
my $timestamp = $dbh->selectrow_array("SELECT NOW()");
my @bugs;
# First update all moved bugs.
foreach my $id (@idlist) {
my $bug = new Bugzilla::Bug($id, $whoid);
push(@bugs, $bug);
$sth->execute($timestamp, $id);
$sth2->execute($id);
AppendComment($id, $whoid, $comment, 0, $timestamp);
if ($bug->bug_status ne 'RESOLVED') {
LogActivityEntry($id, 'bug_status', $bug->bug_status,
'RESOLVED', $whoid, $timestamp);
}
if ($bug->resolution ne 'MOVED') {
LogActivityEntry($id, 'resolution', $bug->resolution,
'MOVED', $whoid, $timestamp);
}
}
$dbh->bz_unlock_tables();
# Now send emails.
foreach my $id (@idlist) {
$vars->{'mailrecipients'} = { 'changer' => $user->login };
$vars->{'id'} = $id;
$vars->{'type'} = "move";
$template->process("bug/process/results.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
$vars->{'header_done'} = 1;
}
# Prepare and send all data about these bugs to the new database
my $to = Param('move-to-address');
$to =~ s/@/\@/;
my $from = Param('moved-from-address');
$from =~ s/@/\@/;
my $msg = "To: $to\n";
$msg .= "From: Bugzilla <" . $from . ">\n";
$msg .= "Subject: Moving bug(s) " . join(', ', @idlist) . "\n\n";
my @fieldlist = (Bugzilla::Bug->fields, 'group', 'long_desc',
'attachment', 'attachmentdata');
my %displayfields;
foreach (@fieldlist) {
$displayfields{$_} = 1;
}
$template->process("bug/show.xml.tmpl", { bugs => \@bugs,
displayfields => \%displayfields,
}, \$msg)
|| ThrowTemplateError($template->error());
$msg .= "\n";
Bugzilla::BugMail::MessageToMTA($msg);
# End the response page.
$template->process("bug/navigate.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
$template->process("global/footer.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
exit;
}
$::query = "update bugs\nset";
$::comma = "";
umask(0);
sub _remove_remaining_time {
if (UserInGroup(Param('timetrackinggroup'))) {
if ( defined $cgi->param('remaining_time')
&& $cgi->param('remaining_time') > 0 )
{
$cgi->param('remaining_time', 0);
$vars->{'message'} = "remaining_time_zeroed";
}
}
else {
DoComma();
$::query .= "remaining_time = 0";
}
}
sub DoComma {
$::query .= "$::comma\n ";
$::comma = ",";
}
# $everconfirmed is used by ChangeStatus() to determine whether we are
# confirming the bug or not.
my $everconfirmed;
sub DoConfirm {
if (CheckCanChangeField("canconfirm", scalar $cgi->param('id'), 0, 1)) {
DoComma();
$::query .= "everconfirmed = 1";
$everconfirmed = 1;
}
}
sub ChangeStatus {
my ($str) = (@_);
if (!$cgi->param('dontchange')
|| $str ne $cgi->param('dontchange')) {
DoComma();
if ($cgi->param('knob') eq 'reopen') {
# When reopening, we need to check whether the bug was ever
# confirmed or not
$::query .= "bug_status = CASE WHEN everconfirmed = 1 THEN " .
SqlQuote($str) . " ELSE 'UNCONFIRMED' END";
} elsif (IsOpenedState($str)) {
# Note that we cannot combine this with the above branch - here we
# need to check if bugs.bug_status is open, (since we don't want to
# reopen closed bugs when reassigning), while above the whole point
# is to reopen a closed bug.
# Currently, the UI doesn't permit a user to reassign a closed bug
# from the single bug page (only during a mass change), but they
# could still hack the submit, so don't restrict this extended
# check to the mass change page for safety/sanity/consistency
# purposes.
# The logic for this block is:
# If the new state is open:
# If the old state was open
# If the bug was confirmed
# - move it to the new state
# Else
# - Set the state to unconfirmed
# Else
# - leave it as it was
# This is valid only because 'reopen' is the only thing which moves
# from closed to open, and its handled above
# This also relies on the fact that confirming and accepting have
# already called DoConfirm before this is called
my @open_state = map(SqlQuote($_), OpenStates());
my $open_state = join(", ", @open_state);
# If we are changing everconfirmed to 1, we have to take this change
# into account and the new bug status is given by $str.
my $cond = SqlQuote($str);
# If we are not setting everconfirmed, the new bug status depends on
# the actual value of everconfirmed, which is bug-specific.
unless ($everconfirmed) {
$cond = "(CASE WHEN everconfirmed = 1 THEN " . $cond .
" ELSE 'UNCONFIRMED' END)";
}
$::query .= "bug_status = CASE WHEN bug_status IN($open_state) THEN " .
$cond . " ELSE bug_status END";
} else {
$::query .= "bug_status = " . SqlQuote($str);
}
# If bugs are reassigned and their status is "UNCONFIRMED", they
# should keep this status instead of "NEW" as suggested here.
# This point is checked for each bug later in the code.
$cgi->param('bug_status', $str);
}
}
sub ChangeResolution {
my ($str) = (@_);
if (!$cgi->param('dontchange')
|| $str ne $cgi->param('dontchange'))
{
DoComma();
$::query .= "resolution = " . SqlQuote($str);
# We define this variable here so that customized installations
# may set rules based on the resolution in CheckCanChangeField.
$cgi->param('resolution', $str);
}
}
# Changing this so that it will process groups from checkboxes instead of
# select lists. This means that instead of looking for the bit-X values in
# the form, we need to loop through all the bug groups this user has access
# to, and for each one, see if it's selected.
# If the form element isn't present, or the user isn't in the group, leave
# it as-is
my @groupAdd = ();
my @groupDel = ();
SendSQL("SELECT groups.id, isactive FROM groups " .
"WHERE id IN($grouplist) " .
"AND isbuggroup = 1");
while (my ($b, $isactive) = FetchSQLData()) {
# The multiple change page may not show all groups a bug is in
# (eg product groups when listing more than one product)
# Only consider groups which were present on the form. We can't do this
# for single bug changes because non-checked checkboxes aren't present.
# All the checkboxes should be shown in that case, though, so its not
# an issue there
if (defined $cgi->param('id') || defined $cgi->param("bit-$b")) {
if (!$cgi->param("bit-$b")) {
push(@groupDel, $b);
} elsif ($cgi->param("bit-$b") == 1 && $isactive) {
push(@groupAdd, $b);
}
}
}
foreach my $field ("rep_platform", "priority", "bug_severity",
"bug_file_loc", "short_desc", "version", "op_sys",
"target_milestone", "status_whiteboard") {
if (defined $cgi->param($field)) {
if (!$cgi->param('dontchange')
|| $cgi->param($field) ne $cgi->param('dontchange')) {
DoComma();
$::query .= "$field = " . SqlQuote(trim($cgi->param($field)));
}
}
}
# Add custom fields data to the query that will update the database.
foreach my $field (Bugzilla->custom_field_names) {
if (defined $cgi->param($field)
&& (!$cgi->param('dontchange')
|| $cgi->param($field) ne $cgi->param('dontchange')))
{
DoComma();
$::query .= "$field = " . SqlQuote(trim($cgi->param($field)));
}
}
my $prod_id;
my $prod_changed;
my @newprod_ids;
if ($cgi->param('product') ne $cgi->param('dontchange')) {
$prod_id = get_product_id($cgi->param('product'));
$prod_id ||
ThrowUserError("invalid_product_name",
{product => $cgi->param('product')});
DoComma();
@newprod_ids = ($prod_id);
$prod_changed = 1;
$::query .= "product_id = $prod_id";
} else {
@newprod_ids = @{$dbh->selectcol_arrayref("SELECT DISTINCT product_id
FROM bugs
WHERE bug_id IN (" .
join(',', @idlist) .
")")};
if (scalar(@newprod_ids) == 1) {
($prod_id) = @newprod_ids;
}
}
my $comp_id;
if ($cgi->param('component') ne $cgi->param('dontchange')) {
if (scalar(@newprod_ids) > 1) {
ThrowUserError("no_component_change_for_multiple_products");
}
$comp_id = get_component_id($prod_id,
$cgi->param('component'));
$comp_id || ThrowCodeError("invalid_component",
{name => $cgi->param('component'),
product => $cgi->param('product')});
$cgi->param('component_id', $comp_id);
DoComma();
$::query .= "component_id = $comp_id";
}
# If this installation uses bug aliases, and the user is changing the alias,
# add this change to the query.
if (Param("usebugaliases") && defined $cgi->param('alias')) {
my $alias = trim($cgi->param('alias'));
# Since aliases are unique (like bug numbers), they can only be changed
# for one bug at a time, so ignore the alias change unless only a single
# bug is being changed.
if (scalar(@idlist) == 1) {
# Add the alias change to the query. If the field contains the blank
# value, make the field be NULL to indicate that the bug has no alias.
# Otherwise, if the field contains a value, update the record
# with that value.
DoComma();
$::query .= "alias = ";
if ($alias ne "") {
ValidateBugAlias($alias, $idlist[0]);
$::query .= $dbh->quote($alias);
} else {
$::query .= "NULL";
}
}
}
# If the user is submitting changes from show_bug.cgi for a single bug,
# and that bug is restricted to a group, process the checkboxes that
# allowed the user to set whether or not the reporter
# and cc list can see the bug even if they are not members of all groups
# to which the bug is restricted.
if (defined $cgi->param('id')) {
SendSQL("SELECT group_id FROM bug_group_map WHERE bug_id = " .
$cgi->param('id'));
my ($havegroup) = FetchSQLData();
if ( $havegroup ) {
DoComma();
$cgi->param('reporter_accessible',
$cgi->param('reporter_accessible') ? '1' : '0');
$::query .= 'reporter_accessible = ' .
$cgi->param('reporter_accessible');
DoComma();
$cgi->param('cclist_accessible',
$cgi->param('cclist_accessible') ? '1' : '0');
$::query .= 'cclist_accessible = ' . $cgi->param('cclist_accessible');
}
}
if (defined $cgi->param('id') &&
(Param("insidergroup") && UserInGroup(Param("insidergroup")))) {
my $sth = $dbh->prepare('UPDATE longdescs SET isprivate = ?
WHERE bug_id = ? AND bug_when = ?');
foreach my $field ($cgi->param()) {
if ($field =~ /when-([0-9]+)/) {
my $sequence = $1;
my $private = $cgi->param("isprivate-$sequence") ? 1 : 0 ;
if ($private != $cgi->param("oisprivate-$sequence")) {
my $field_data = $cgi->param("$field");
# Make sure a valid date is given.
$field_data = format_time($field_data, '%Y-%m-%d %T');
$sth->execute($private, $cgi->param('id'), $field_data);
}
}
}
}
my $duplicate = 0;
# We need to check the addresses involved in a CC change before we touch any bugs.
# What we'll do here is formulate the CC data into two hashes of ID's involved
# in this CC change. Then those hashes can be used later on for the actual change.
my (%cc_add, %cc_remove);
if (defined $cgi->param('newcc')
|| defined $cgi->param('addselfcc')
|| defined $cgi->param('removecc')
|| defined $cgi->param('masscc')) {
# If masscc is defined, then we came from buglist and need to either add or
# remove cc's... otherwise, we came from bugform and may need to do both.
my ($cc_add, $cc_remove) = "";
if (defined $cgi->param('masscc')) {
if ($cgi->param('ccaction') eq 'add') {
$cc_add = join(' ',$cgi->param('masscc'));
} elsif ($cgi->param('ccaction') eq 'remove') {
$cc_remove = join(' ',$cgi->param('masscc'));
}
} else {
$cc_add = join(' ',$cgi->param('newcc'));
# We came from bug_form which uses a select box to determine what cc's
# need to be removed...
if (defined $cgi->param('removecc') && $cgi->param('cc')) {
$cc_remove = join (",", $cgi->param('cc'));
}
}
if ($cc_add) {
$cc_add =~ s/[\s,]+/ /g; # Change all delimiters to a single space
foreach my $person ( split(" ", $cc_add) ) {
my $pid = DBNameToIdAndCheck($person);
$cc_add{$pid} = $person;
}
}
if ($cgi->param('addselfcc')) {
$cc_add{$whoid} = $user->login;
}
if ($cc_remove) {
$cc_remove =~ s/[\s,]+/ /g; # Change all delimiters to a single space
foreach my $person ( split(" ", $cc_remove) ) {
my $pid = DBNameToIdAndCheck($person);
$cc_remove{$pid} = $person;
}
}
}
# Store the new assignee and QA contact IDs (if any). This is the
# only way to keep these informations when bugs are reassigned by
# component as $cgi->param('assigned_to') and $cgi->param('qa_contact')
# are not the right fields to look at.
# If the assignee or qacontact is changed, the new one is checked when
# changed information is validated. If not, then the unchanged assignee
# or qacontact may have to be validated later.
my $assignee;
my $qacontact;
my $qacontact_checked = 0;
my $assignee_checked = 0;
my %usercache = ();
if (defined $cgi->param('qa_contact')
&& $cgi->param('knob') ne "reassignbycomponent")
{
my $name = trim($cgi->param('qa_contact'));
# The QA contact cannot be deleted from show_bug.cgi for a single bug!
if ($name ne $cgi->param('dontchange')) {
$qacontact = DBNameToIdAndCheck($name) if ($name ne "");
if ($qacontact && Param("strict_isolation")) {
$usercache{$qacontact} ||= Bugzilla::User->new($qacontact);
my $qa_user = $usercache{$qacontact};
foreach my $product_id (@newprod_ids) {
if (!$qa_user->can_edit_product($product_id)) {
my $product_name = get_product_name($product_id);
ThrowUserError('invalid_user_group',
{'users' => $qa_user->login,
'product' => $product_name,
'bug_id' => (scalar(@idlist) > 1)
? undef : $idlist[0]
});
}
}
}
$qacontact_checked = 1;
DoComma();
if($qacontact) {
$::query .= "qa_contact = $qacontact";
}
else {
$::query .= "qa_contact = NULL";
}
}
}
SWITCH: for ($cgi->param('knob')) {
/^none$/ && do {
last SWITCH;
};
/^confirm$/ && CheckonComment( "confirm" ) && do {
DoConfirm();
ChangeStatus('NEW');
last SWITCH;
};
/^accept$/ && CheckonComment( "accept" ) && do {
DoConfirm();
ChangeStatus('ASSIGNED');
if (Param("usetargetmilestone") && Param("musthavemilestoneonaccept")) {
$requiremilestone = 1;
}
last SWITCH;
};
/^clearresolution$/ && CheckonComment( "clearresolution" ) && do {
ChangeResolution('');
last SWITCH;
};
/^resolve$/ && CheckonComment( "resolve" ) && do {
# Check here, because its the only place we require the resolution
check_field('resolution', scalar $cgi->param('resolution'),
\@::settable_resolution);
# don't resolve as fixed while still unresolved blocking bugs
if (Param("noresolveonopenblockers")
&& $cgi->param('resolution') eq 'FIXED')
{
my @dependencies = Bugzilla::Bug::CountOpenDependencies(@idlist);
if (scalar @dependencies > 0) {
ThrowUserError("still_unresolved_bugs",
{ dependencies => \@dependencies,
dependency_count => scalar @dependencies });
}
}
# RESOLVED bugs should have no time remaining;
# more time can be added for the VERIFY step, if needed.
_remove_remaining_time();
ChangeStatus('RESOLVED');
ChangeResolution($cgi->param('resolution'));
last SWITCH;
};
/^reassign$/ && CheckonComment( "reassign" ) && do {
if ($cgi->param('andconfirm')) {
DoConfirm();
}
ChangeStatus('NEW');
DoComma();
if (defined $cgi->param('assigned_to')
&& trim($cgi->param('assigned_to')) ne "") {
$assignee = DBNameToIdAndCheck(trim($cgi->param('assigned_to')));
if (Param("strict_isolation")) {
$usercache{$assignee} ||= Bugzilla::User->new($assignee);
my $assign_user = $usercache{$assignee};
foreach my $product_id (@newprod_ids) {
if (!$assign_user->can_edit_product($product_id)) {
my $product_name = get_product_name($product_id);
ThrowUserError('invalid_user_group',
{'users' => $assign_user->login,
'product' => $product_name,
'bug_id' => (scalar(@idlist) > 1)
? undef : $idlist[0]
});
}
}
}
} else {
ThrowUserError("reassign_to_empty");
}
$assignee_checked = 1;
$::query .= "assigned_to = $assignee";
last SWITCH;
};
/^reassignbycomponent$/ && CheckonComment( "reassignbycomponent" ) && do {
if ($cgi->param('compconfirm')) {
DoConfirm();
}
ChangeStatus('NEW');
last SWITCH;
};
/^reopen$/ && CheckonComment( "reopen" ) && do {
ChangeStatus('REOPENED');
ChangeResolution('');
last SWITCH;
};
/^verify$/ && CheckonComment( "verify" ) && do {
ChangeStatus('VERIFIED');
last SWITCH;
};
/^close$/ && CheckonComment( "close" ) && do {
# CLOSED bugs should have no time remaining.
_remove_remaining_time();
ChangeStatus('CLOSED');
last SWITCH;
};
/^duplicate$/ && CheckonComment( "duplicate" ) && do {
# You cannot mark bugs as duplicates when changing
# several bugs at once.
unless (defined $cgi->param('id')) {
ThrowUserError('dupe_not_allowed');
}
# Make sure we can change the original bug (issue A on bug 96085)
defined($cgi->param('dup_id'))
|| ThrowCodeError('undefined_field', { field => 'dup_id' });
$duplicate = $cgi->param('dup_id');
ValidateBugID($duplicate, 'dup_id');
$cgi->param('dup_id', $duplicate);
# Make sure the bug is not already marked as a dupe
# (may appear in race condition)
my $dupe_of =
$dbh->selectrow_array("SELECT dupe_of FROM duplicates
WHERE dupe = ?",
undef, $cgi->param('id'));
if ($dupe_of) {
ThrowUserError("dupe_entry_found", { dupe_of => $dupe_of });
}
# Make sure a loop isn't created when marking this bug
# as duplicate.
my %dupes;
$dupe_of = $duplicate;
my $sth = $dbh->prepare('SELECT dupe_of FROM duplicates
WHERE dupe = ?');
while ($dupe_of) {
if ($dupe_of == $cgi->param('id')) {
ThrowUserError('dupe_loop_detected', { bug_id => $cgi->param('id'),
dupe_of => $duplicate });
}
# If $dupes{$dupe_of} is already set to 1, then a loop
# already exists which does not involve this bug.
# As the user is not responsible for this loop, do not
# prevent him from marking this bug as a duplicate.
last if exists $dupes{"$dupe_of"};
$dupes{"$dupe_of"} = 1;
$sth->execute($dupe_of);
$dupe_of = $sth->fetchrow_array;
}
# Also, let's see if the reporter has authorization to see
# the bug to which we are duping. If not we need to prompt.
DuplicateUserConfirm();
# DUPLICATE bugs should have no time remaining.
_remove_remaining_time();
ChangeStatus('RESOLVED');
ChangeResolution('DUPLICATE');
my $comment = $cgi->param('comment');
$comment .= "\n\n*** This bug has been marked " .
"as a duplicate of bug $duplicate ***";
$cgi->param('comment', $comment);
last SWITCH;
};
ThrowCodeError("unknown_action", { action => $cgi->param('knob') });
}
my @keywordlist;
my %keywordseen;
if (defined $cgi->param('keywords')) {
foreach my $keyword (split(/[\s,]+/, $cgi->param('keywords'))) {
if ($keyword eq '') {
next;
}
my $i = GetKeywordIdFromName($keyword);
if (!$i) {
ThrowUserError("unknown_keyword",
{ keyword => $keyword });
}
if (!$keywordseen{$i}) {
push(@keywordlist, $i);
$keywordseen{$i} = 1;
}
}
}
my $keywordaction = $cgi->param('keywordaction') || "makeexact";
if (!grep($keywordaction eq $_, qw(add delete makeexact))) {
$keywordaction = "makeexact";
}
if ($::comma eq ""
&& (! @groupAdd) && (! @groupDel)
&& (! @::legal_keywords || (0 == @keywordlist && $keywordaction ne "makeexact"))
&& defined $cgi->param('masscc') && ! $cgi->param('masscc')
) {
if (!defined $cgi->param('comment') || $cgi->param('comment') =~ /^\s*$/) {
ThrowUserError("bugs_not_changed");
}
}
# Process data for Time Tracking fields
if (UserInGroup(Param('timetrackinggroup'))) {
foreach my $field ("estimated_time", "remaining_time") {
if (defined $cgi->param($field)) {
my $er_time = trim($cgi->param($field));
if ($er_time ne $cgi->param('dontchange')) {
DoComma();
$::query .= "$field = " . SqlQuote($er_time);
}
}
}
if (defined $cgi->param('deadline')) {
DoComma();
$::query .= "deadline = ";
if ($cgi->param('deadline')) {
validate_date($cgi->param('deadline'))
|| ThrowUserError('illegal_date', {date => $cgi->param('deadline'),
format => 'YYYY-MM-DD'});
$::query .= SqlQuote($cgi->param('deadline'));
} else {
$::query .= "NULL" ;
}
}
}
my $basequery = $::query;
my $delta_ts;
sub SnapShotBug {
my ($id) = (@_);
SendSQL("SELECT delta_ts, " . join(',', @::log_columns) .
" FROM bugs WHERE bug_id = $id");
my @row = FetchSQLData();
$delta_ts = shift @row;
return @row;
}
sub SnapShotDeps {
my ($i, $target, $me) = (@_);
SendSQL("SELECT $target FROM dependencies WHERE $me = $i ORDER BY $target");
my @list;
while (MoreSQLData()) {
push(@list, FetchOneColumn());
}
return join(',', @list);
}
my $timestamp;
my $bug_changed;
sub LogDependencyActivity {
my ($i, $oldstr, $target, $me, $timestamp) = (@_);
my $sql_timestamp = SqlQuote($timestamp);
my $newstr = SnapShotDeps($i, $target, $me);
if ($oldstr ne $newstr) {
# Figure out what's really different...
my ($removed, $added) = diff_strings($oldstr, $newstr);
LogActivityEntry($i,$target,$removed,$added,$whoid,$timestamp);
# update timestamp on target bug so midairs will be triggered
SendSQL("UPDATE bugs SET delta_ts = $sql_timestamp WHERE bug_id = $i");
$bug_changed = 1;
return 1;
}
return 0;
}
if (Param("strict_isolation")) {
my @blocked_cc = ();
foreach my $pid (keys %cc_add) {
$usercache{$pid} ||= Bugzilla::User->new($pid);
my $cc_user = $usercache{$pid};
foreach my $product_id (@newprod_ids) {
if (!$cc_user->can_edit_product($product_id)) {
push (@blocked_cc, $cc_user->login);
last;
}
}
}
if (scalar(@blocked_cc)) {
ThrowUserError("invalid_user_group",
{'users' => \@blocked_cc,
'bug_id' => (scalar(@idlist) > 1) ? undef : $idlist[0]});
}
}
if ($prod_changed && Param("strict_isolation")) {
my $sth_cc = $dbh->prepare("SELECT who
FROM cc
WHERE bug_id = ?");
my $sth_bug = $dbh->prepare("SELECT assigned_to, qa_contact
FROM bugs
WHERE bug_id = ?");
my $prod_name = get_product_name($prod_id);
foreach my $id (@idlist) {
$sth_cc->execute($id);
my @blocked_cc = ();
while (my ($pid) = $sth_cc->fetchrow_array) {
$usercache{$pid} ||= Bugzilla::User->new($pid);
my $cc_user = $usercache{$pid};
if (!$cc_user->can_edit_product($prod_id)) {
push (@blocked_cc, $cc_user->login);
}
}
if (scalar(@blocked_cc)) {
ThrowUserError('invalid_user_group',
{'users' => \@blocked_cc,
'bug_id' => $id,
'product' => $prod_name});
}
$sth_bug->execute($id);
my ($assignee, $qacontact) = $sth_bug->fetchrow_array;
if (!$assignee_checked) {
$usercache{$assignee} ||= Bugzilla::User->new($assignee);
my $assign_user = $usercache{$assignee};
if (!$assign_user->can_edit_product($prod_id)) {
ThrowUserError('invalid_user_group',
{'users' => $assign_user->login,
'bug_id' => $id,
'product' => $prod_name});
}
}
if (!$qacontact_checked && $qacontact) {
$usercache{$qacontact} ||= Bugzilla::User->new($qacontact);
my $qa_user = $usercache{$qacontact};
if (!$qa_user->can_edit_product($prod_id)) {
ThrowUserError('invalid_user_group',
{'users' => $qa_user->login,
'bug_id' => $id,
'product' => $prod_name});
}
}
}
}
# This loop iterates once for each bug to be processed (i.e. all the
# bugs selected when this script is called with multiple bugs selected
# from buglist.cgi, or just the one bug when called from
# show_bug.cgi).
#
foreach my $id (@idlist) {
my $query = $basequery;
my $bug_obj = new Bugzilla::Bug($id, $whoid);
if ($cgi->param('knob') eq 'reassignbycomponent') {
# We have to check whether the bug is moved to another product
# and/or component before reassigning. If $comp_id is defined,
# use it; else use the product/component the bug is already in.
my $new_comp_id = $comp_id || $bug_obj->{'component_id'};
$assignee = $dbh->selectrow_array('SELECT initialowner
FROM components
WHERE components.id = ?',
undef, $new_comp_id);
$query .= ", assigned_to = $assignee";
if (Param("useqacontact")) {
$qacontact = $dbh->selectrow_array('SELECT initialqacontact
FROM components
WHERE components.id = ?',
undef, $new_comp_id);
if ($qacontact) {
$query .= ", qa_contact = $qacontact";
}
else {
$query .= ", qa_contact = NULL";
}
}
}
my %dependencychanged;
$bug_changed = 0;
my $write = "WRITE"; # Might want to make a param to control
# whether we do LOW_PRIORITY ...
$dbh->bz_lock_tables("bugs $write", "bugs_activity $write",
"cc $write", "cc AS selectVisible_cc $write",
"profiles READ", "dependencies $write", "votes $write",
"products READ", "components READ",
"keywords $write", "longdescs $write", "fielddefs $write",
"bug_group_map $write", "flags $write", "duplicates $write",
"user_group_map READ", "group_group_map READ", "flagtypes READ",
"flaginclusions AS i READ", "flagexclusions AS e READ",
"keyworddefs READ", "groups READ", "attachments READ",
"group_control_map AS oldcontrolmap READ",
"group_control_map AS newcontrolmap READ",
"group_control_map READ", "email_setting READ");
# It may sound crazy to set %formhash for each bug as $cgi->param()
# will not change, but %formhash is modified below and we prefer
# to set it again.
my $i = 0;
my @oldvalues = SnapShotBug($id);
my %oldhash;
my %formhash;
foreach my $col (@::log_columns) {
# Consider NULL db entries to be equivalent to the empty string
$oldvalues[$i] = defined($oldvalues[$i]) ? $oldvalues[$i] : '';
# Convert the deadline taken from the DB into the YYYY-MM-DD format
# for consistency with the deadline provided by the user, if any.
# Else CheckCanChangeField() would see them as different in all cases.
if ($col eq 'deadline') {
$oldvalues[$i] = format_time($oldvalues[$i], "%Y-%m-%d");
}
$oldhash{$col} = $oldvalues[$i];
$formhash{$col} = $cgi->param($col) if defined $cgi->param($col);
$i++;
}
# If the user is reassigning bugs, we need to:
# - convert $newhash{'assigned_to'} and $newhash{'qa_contact'}
# email addresses into their corresponding IDs;
# - update $newhash{'bug_status'} to its real state if the bug
# is in the unconfirmed state.
$formhash{'qa_contact'} = $qacontact if Param('useqacontact');
if ($cgi->param('knob') eq 'reassignbycomponent'
|| $cgi->param('knob') eq 'reassign') {
$formhash{'assigned_to'} = $assignee;
if ($oldhash{'bug_status'} eq 'UNCONFIRMED') {
$formhash{'bug_status'} = $oldhash{'bug_status'};
}
}
foreach my $col (@::log_columns) {
if (exists $formhash{$col}
&& !CheckCanChangeField($col, $id, $oldhash{$col}, $formhash{$col}))
{
my $vars;
if ($col eq 'component_id') {
# Display the component name
$vars->{'oldvalue'} = get_component_name($oldhash{$col});
$vars->{'newvalue'} = $cgi->param('component');
$vars->{'field'} = 'component';
} elsif ($col eq 'assigned_to' || $col eq 'qa_contact') {
# Display the assignee or QA contact email address
$vars->{'oldvalue'} = DBID_to_name($oldhash{$col});
$vars->{'newvalue'} = DBID_to_name($formhash{$col});
$vars->{'field'} = $col;
} else {
$vars->{'oldvalue'} = $oldhash{$col};
$vars->{'newvalue'} = $formhash{$col};
$vars->{'field'} = $col;
}
$vars->{'privs'} = $PrivilegesRequired;
ThrowUserError("illegal_change", $vars);
}
}
# When editing multiple bugs, users can specify a list of keywords to delete
# from bugs. If the list matches the current set of keywords on those bugs,
# CheckCanChangeField above will fail to check permissions because it thinks
# the list hasn't changed. To fix that, we have to call CheckCanChangeField
# again with old!=new if the keyword action is "delete" and old=new.
if ($keywordaction eq "delete"
&& defined $cgi->param('keywords')
&& length(@keywordlist) > 0
&& $cgi->param('keywords') eq $oldhash{keywords}
&& !CheckCanChangeField("keywords", $id, "old is not", "equal to new"))
{
$vars->{'oldvalue'} = $oldhash{keywords};
$vars->{'newvalue'} = "no keywords";
$vars->{'field'} = "keywords";
$vars->{'privs'} = $PrivilegesRequired;
ThrowUserError("illegal_change", $vars);
}
$oldhash{'product'} = get_product_name($oldhash{'product_id'});
if (!Bugzilla->user->can_edit_product($oldhash{'product_id'})) {
ThrowUserError("product_edit_denied",
{ product => $oldhash{'product'} });
}
if ($requiremilestone) {
# musthavemilestoneonaccept applies only if at least two
# target milestones are defined for the current product.
my $nb_milestones = scalar(@{$::target_milestone{$oldhash{'product'}}});
if ($nb_milestones > 1) {
my $value = $cgi->param('target_milestone');
if (!defined $value || $value eq $cgi->param('dontchange')) {
$value = $oldhash{'target_milestone'};
}
my $defaultmilestone =
$dbh->selectrow_array("SELECT defaultmilestone
FROM products WHERE id = ?",
undef, $oldhash{'product_id'});
# if musthavemilestoneonaccept == 1, then the target
# milestone must be different from the default one.
if ($value eq $defaultmilestone) {
ThrowUserError("milestone_required", { bug_id => $id });
}
}
}
if (defined $cgi->param('delta_ts') && $cgi->param('delta_ts') ne $delta_ts)
{
($vars->{'operations'}) =
Bugzilla::Bug::GetBugActivity($id, $cgi->param('delta_ts'));
$vars->{'start_at'} = $cgi->param('longdesclength');
# Always sort midair collision comments oldest to newest,
# regardless of the user's personal preference.
$vars->{'comments'} = Bugzilla::Bug::GetComments($id, "oldest_to_newest");
$cgi->param('delta_ts', $delta_ts);
$vars->{'bug_id'} = $id;
$dbh->bz_unlock_tables(UNLOCK_ABORT);
# Warn the user about the mid-air collision and ask them what to do.
$template->process("bug/process/midair.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
exit;
}
# Gather the dependency list, and make sure there are no circular refs
my %deps = Bugzilla::Bug::ValidateDependencies(scalar($cgi->param('dependson')),
scalar($cgi->param('blocked')),
$id);
#
# Start updating the relevant database entries
#
SendSQL("select now()");
$timestamp = FetchOneColumn();
my $sql_timestamp = SqlQuote($timestamp);
my $work_time;
if (UserInGroup(Param('timetrackinggroup'))) {
$work_time = $cgi->param('work_time');
if ($work_time) {
# AppendComment (called below) can in theory raise an error,
# but because we've already validated work_time here it's
# safe to log the entry before adding the comment.
LogActivityEntry($id, "work_time", "", $work_time,
$whoid, $timestamp);
}
}
if ($cgi->param('comment') || $work_time) {
AppendComment($id, $whoid, scalar($cgi->param('comment')),
scalar($cgi->param('commentprivacy')), $timestamp, $work_time);
$bug_changed = 1;
}
if (@::legal_keywords && defined $cgi->param('keywords')) {
# There are three kinds of "keywordsaction": makeexact, add, delete.
# For makeexact, we delete everything, and then add our things.
# For add, we delete things we're adding (to make sure we don't
# end up having them twice), and then we add them.
# For delete, we just delete things on the list.
my $changed = 0;
if ($keywordaction eq "makeexact") {
SendSQL("DELETE FROM keywords WHERE bug_id = $id");
$changed = 1;
}
foreach my $keyword (@keywordlist) {
if ($keywordaction ne "makeexact") {
SendSQL("DELETE FROM keywords
WHERE bug_id = $id AND keywordid = $keyword");
$changed = 1;
}
if ($keywordaction ne "delete") {
SendSQL("INSERT INTO keywords
(bug_id, keywordid) VALUES ($id, $keyword)");
$changed = 1;
}
}
if ($changed) {
SendSQL("SELECT keyworddefs.name
FROM keyworddefs INNER JOIN keywords
ON keyworddefs.id = keywords.keywordid
WHERE keywords.bug_id = $id
ORDER BY keyworddefs.name");
my @list;
while (MoreSQLData()) {
push(@list, FetchOneColumn());
}
$dbh->do("UPDATE bugs SET keywords = ? WHERE bug_id = ?",
undef, join(', ', @list), $id);
}
}
$query .= " where bug_id = $id";
if ($::comma ne "") {
SendSQL($query);
}
# Check for duplicates if the bug is [re]open
SendSQL("SELECT resolution FROM bugs WHERE bug_id = $id");
my $resolution = FetchOneColumn();
if ($resolution eq '') {
SendSQL("DELETE FROM duplicates WHERE dupe = $id");
}
my $newproduct_id = $oldhash{'product_id'};
if ($cgi->param('product') ne $cgi->param('dontchange')) {
my $newproduct_id = get_product_id($cgi->param('product'));
}
my %groupsrequired = ();
my %groupsforbidden = ();
SendSQL("SELECT id, membercontrol
FROM groups LEFT JOIN group_control_map
ON id = group_id
AND product_id = $newproduct_id WHERE isactive != 0");
while (MoreSQLData()) {
my ($group, $control) = FetchSQLData();
$control ||= 0;
unless ($control > &::CONTROLMAPNA) {
$groupsforbidden{$group} = 1;
}
if ($control == &::CONTROLMAPMANDATORY) {
$groupsrequired{$group} = 1;
}
}
my @groupAddNames = ();
my @groupAddNamesAll = ();
foreach my $grouptoadd (@groupAdd, keys %groupsrequired) {
next if $groupsforbidden{$grouptoadd};
push(@groupAddNamesAll, GroupIdToName($grouptoadd));
if (!BugInGroupId($id, $grouptoadd)) {
push(@groupAddNames, GroupIdToName($grouptoadd));
SendSQL("INSERT INTO bug_group_map (bug_id, group_id)
VALUES ($id, $grouptoadd)");
}
}
my @groupDelNames = ();
my @groupDelNamesAll = ();
foreach my $grouptodel (@groupDel, keys %groupsforbidden) {
push(@groupDelNamesAll, GroupIdToName($grouptodel));
next if $groupsrequired{$grouptodel};
if (BugInGroupId($id, $grouptodel)) {
push(@groupDelNames, GroupIdToName($grouptodel));
}
SendSQL("DELETE FROM bug_group_map
WHERE bug_id = $id AND group_id = $grouptodel");
}
my $groupDelNames = join(',', @groupDelNames);
my $groupAddNames = join(',', @groupAddNames);
if ($groupDelNames ne $groupAddNames) {
LogActivityEntry($id, "bug_group", $groupDelNames, $groupAddNames,
$whoid, $timestamp);
$bug_changed = 1;
}
my @ccRemoved = ();
if (defined $cgi->param('newcc')
|| defined $cgi->param('addselfcc')
|| defined $cgi->param('removecc')
|| defined $cgi->param('masscc')) {
# Get the current CC list for this bug
my %oncc;
SendSQL("SELECT who FROM cc WHERE bug_id = $id");
while (MoreSQLData()) {
$oncc{FetchOneColumn()} = 1;
}
my (@added, @removed) = ();
foreach my $pid (keys %cc_add) {
# If this person isn't already on the cc list, add them
if (! $oncc{$pid}) {
SendSQL("INSERT INTO cc (bug_id, who) VALUES ($id, $pid)");
push (@added, $cc_add{$pid});
$oncc{$pid} = 1;
}
}
foreach my $pid (keys %cc_remove) {
# If the person is on the cc list, remove them
if ($oncc{$pid}) {
SendSQL("DELETE FROM cc WHERE bug_id = $id AND who = $pid");
push (@removed, $cc_remove{$pid});
$oncc{$pid} = 0;
}
}
# If any changes were found, record it in the activity log
if (scalar(@removed) || scalar(@added)) {
my $removed = join(", ", @removed);
my $added = join(", ", @added);
LogActivityEntry($id,"cc",$removed,$added,$whoid,$timestamp);
$bug_changed = 1;
}
@ccRemoved = @removed;
}
# We need to send mail for dependson/blocked bugs if the dependencies
# change or the status or resolution change. This var keeps track of that.
my $check_dep_bugs = 0;
foreach my $pair ("blocked/dependson", "dependson/blocked") {
my ($me, $target) = split("/", $pair);
my @oldlist = @{$dbh->selectcol_arrayref("SELECT $target FROM dependencies
WHERE $me = ? ORDER BY $target",
undef, $id)};
@dependencychanged{@oldlist} = 1;
if (defined $cgi->param($target)) {
my %snapshot;
my @newlist = sort {$a <=> $b} @{$deps{$target}};
@dependencychanged{@newlist} = 1;
while (0 < @oldlist || 0 < @newlist) {
if (@oldlist == 0 || (@newlist > 0 &&
$oldlist[0] > $newlist[0])) {
$snapshot{$newlist[0]} = SnapShotDeps($newlist[0], $me,
$target);
shift @newlist;
} elsif (@newlist == 0 || (@oldlist > 0 &&
$newlist[0] > $oldlist[0])) {
$snapshot{$oldlist[0]} = SnapShotDeps($oldlist[0], $me,
$target);
shift @oldlist;
} else {
if ($oldlist[0] != $newlist[0]) {
$dbh->bz_unlock_tables(UNLOCK_ABORT);
die "Error in list comparing code";
}
shift @oldlist;
shift @newlist;
}
}
my @keys = keys(%snapshot);
if (@keys) {
my $oldsnap = SnapShotDeps($id, $target, $me);
SendSQL("delete from dependencies where $me = $id");
foreach my $i (@{$deps{$target}}) {
SendSQL("insert into dependencies ($me, $target) values ($id, $i)");
}
foreach my $k (@keys) {
LogDependencyActivity($k, $snapshot{$k}, $me, $target, $timestamp);
}
LogDependencyActivity($id, $oldsnap, $target, $me, $timestamp);
$check_dep_bugs = 1;
}
}
}
# When a bug changes products and the old or new product is associated
# with a bug group, it may be necessary to remove the bug from the old
# group or add it to the new one. There are a very specific series of
# conditions under which these activities take place, more information
# about which can be found in comments within the conditionals below.
# Check if the user has changed the product to which the bug belongs;
if ($cgi->param('product') ne $cgi->param('dontchange')
&& $cgi->param('product') ne $oldhash{'product'}
) {
$newproduct_id = get_product_id($cgi->param('product'));
# Depending on the "addtonewgroup" variable, groups with
# defaults will change.
#
# For each group, determine
# - The group id and if it is active
# - The control map value for the old product and this group
# - The control map value for the new product and this group
# - Is the user in this group?
# - Is the bug in this group?
SendSQL("SELECT DISTINCT groups.id, isactive, " .
"oldcontrolmap.membercontrol, newcontrolmap.membercontrol, " .
"CASE WHEN groups.id IN ($grouplist) THEN 1 ELSE 0 END, " .
"CASE WHEN bug_group_map.group_id IS NOT NULL " .
"THEN 1 ELSE 0 END " .
"FROM groups " .
"LEFT JOIN group_control_map AS oldcontrolmap " .
"ON oldcontrolmap.group_id = groups.id " .
"AND oldcontrolmap.product_id = " . $oldhash{'product_id'} .
" LEFT JOIN group_control_map AS newcontrolmap " .
"ON newcontrolmap.group_id = groups.id " .
"AND newcontrolmap.product_id = $newproduct_id " .
"LEFT JOIN bug_group_map " .
"ON bug_group_map.group_id = groups.id " .
"AND bug_group_map.bug_id = $id "
);
my @groupstoremove = ();
my @groupstoadd = ();
my @defaultstoremove = ();
my @defaultstoadd = ();
my @allgroups = ();
my $buginanydefault = 0;
my $buginanychangingdefault = 0;
while (MoreSQLData()) {
my ($groupid, $isactive, $oldcontrol, $newcontrol,
$useringroup, $bugingroup) = FetchSQLData();
# An undefined newcontrol is none.
$newcontrol = CONTROLMAPNA unless $newcontrol;
$oldcontrol = CONTROLMAPNA unless $oldcontrol;
push(@allgroups, $groupid);
if (($bugingroup) && ($isactive)
&& ($oldcontrol == CONTROLMAPDEFAULT)) {
# Bug was in a default group.
$buginanydefault = 1;
if (($newcontrol != CONTROLMAPDEFAULT)
&& ($newcontrol != CONTROLMAPMANDATORY)) {
# Bug was in a default group that no longer is.
$buginanychangingdefault = 1;
push (@defaultstoremove, $groupid);
}
}
if (($isactive) && (!$bugingroup)
&& ($newcontrol == CONTROLMAPDEFAULT)
&& ($useringroup)) {
push (@defaultstoadd, $groupid);
}
if (($bugingroup) && ($isactive) && ($newcontrol == CONTROLMAPNA)) {
# Group is no longer permitted.
push(@groupstoremove, $groupid);
}
if ((!$bugingroup) && ($isactive)
&& ($newcontrol == CONTROLMAPMANDATORY)) {
# Group is now required.
push(@groupstoadd, $groupid);
}
}
# If addtonewgroups = "yes", old default groups will be removed
# and new default groups will be added.
# If addtonewgroups = "yesifinold", old default groups will be removed
# and new default groups will be added only if the bug was in ANY
# of the old default groups.
# If addtonewgroups = "no", old default groups will be removed and not
# replaced.
push(@groupstoremove, @defaultstoremove);
if (AnyDefaultGroups()
&& (($cgi->param('addtonewgroup') eq 'yes')
|| (($cgi->param('addtonewgroup') eq 'yesifinold')
&& ($buginanydefault)))) {
push(@groupstoadd, @defaultstoadd);
}
# Now actually update the bug_group_map.
my @DefGroupsAdded = ();
my @DefGroupsRemoved = ();
foreach my $groupid (@allgroups) {
my $thisadd = grep( ($_ == $groupid), @groupstoadd);
my $thisdel = grep( ($_ == $groupid), @groupstoremove);
if ($thisadd) {
push(@DefGroupsAdded, GroupIdToName($groupid));
SendSQL("INSERT INTO bug_group_map (bug_id, group_id) VALUES " .
"($id, $groupid)");
} elsif ($thisdel) {
push(@DefGroupsRemoved, GroupIdToName($groupid));
SendSQL("DELETE FROM bug_group_map WHERE bug_id = $id " .
"AND group_id = $groupid");
}
}
if ((@DefGroupsAdded) || (@DefGroupsRemoved)) {
LogActivityEntry($id, "bug_group",
join(', ', @DefGroupsRemoved),
join(', ', @DefGroupsAdded),
$whoid, $timestamp);
}
}
# get a snapshot of the newly set values out of the database,
# and then generate any necessary bug activity entries by seeing
# what has changed since before we wrote out the new values.
#
my @newvalues = SnapShotBug($id);
my %newhash;
$i = 0;
foreach my $col (@::log_columns) {
# Consider NULL db entries to be equivalent to the empty string
$newvalues[$i] = defined($newvalues[$i]) ? $newvalues[$i] : '';
# Convert the deadline to the YYYY-MM-DD format.
if ($col eq 'deadline') {
$newvalues[$i] = format_time($newvalues[$i], "%Y-%m-%d");
}
$newhash{$col} = $newvalues[$i];
$i++;
}
# for passing to Bugzilla::BugMail to ensure that when someone is removed
# from one of these fields, they get notified of that fact (if desired)
#
my $origOwner = "";
my $origQaContact = "";
# $msgs will store emails which have to be sent to voters, if any.
my $msgs;
foreach my $c (@::log_columns) {
my $col = $c; # We modify it, don't want to modify array
# values in place.
my $old = shift @oldvalues;
my $new = shift @newvalues;
if ($old ne $new) {
# Products and components are now stored in the DB using ID's
# We need to translate this to English before logging it
if ($col eq 'product_id') {
$old = get_product_name($old);
$new = get_product_name($new);
$col = 'product';
}
if ($col eq 'component_id') {
$old = get_component_name($old);
$new = get_component_name($new);
$col = 'component';
}
# save off the old value for passing to Bugzilla::BugMail so
# the old assignee can be notified
#
if ($col eq 'assigned_to') {
$old = ($old) ? DBID_to_name($old) : "";
$new = ($new) ? DBID_to_name($new) : "";
$origOwner = $old;
}
# ditto for the old qa contact
#
if ($col eq 'qa_contact') {
$old = ($old) ? DBID_to_name($old) : "";
$new = ($new) ? DBID_to_name($new) : "";
$origQaContact = $old;
}
# If this is the keyword field, only record the changes, not everything.
if ($col eq 'keywords') {
($old, $new) = diff_strings($old, $new);
}
if ($col eq 'product') {
# If some votes have been removed, RemoveVotes() returns
# a list of messages to send to voters.
# We delay the sending of these messages till tables are unlocked.
$msgs = RemoveVotes($id, 0,
"This bug has been moved to a different product");
}
if ($col eq 'bug_status'
&& IsOpenedState($old) ne IsOpenedState($new))
{
$check_dep_bugs = 1;
}
LogActivityEntry($id,$col,$old,$new,$whoid,$timestamp);
$bug_changed = 1;
}
}
# Set and update flags.
Bugzilla::Flag::process($id, undef, $timestamp, $cgi);
if ($bug_changed) {
SendSQL("UPDATE bugs SET delta_ts = $sql_timestamp WHERE bug_id = $id");
}
$dbh->bz_unlock_tables();
# Now is a good time to send email to voters.
foreach my $msg (@$msgs) {
Bugzilla::BugMail::MessageToMTA($msg);
}
if ($duplicate) {
# Check to see if Reporter of this bug is reporter of Dupe
SendSQL("SELECT reporter FROM bugs WHERE bug_id = " .
$cgi->param('id'));
my $reporter = FetchOneColumn();
SendSQL("SELECT reporter FROM bugs WHERE bug_id = " .
"$duplicate and reporter = $reporter");
my $isreporter = FetchOneColumn();
SendSQL("SELECT who FROM cc WHERE bug_id = " .
" $duplicate and who = $reporter");
my $isoncc = FetchOneColumn();
unless ($isreporter || $isoncc
|| !$cgi->param('confirm_add_duplicate')) {
# The reporter is oblivious to the existence of the new bug and is permitted access
# ... add 'em to the cc (and record activity)
LogActivityEntry($duplicate,"cc","",DBID_to_name($reporter),
$whoid,$timestamp);
SendSQL("INSERT INTO cc (who, bug_id) " .
"VALUES ($reporter, $duplicate)");
}
# Bug 171639 - Duplicate notifications do not need to be private.
AppendComment($duplicate, $whoid,
"*** Bug " . $cgi->param('id') .
" has been marked as a duplicate of this bug. ***",
0, $timestamp);
SendSQL("INSERT INTO duplicates VALUES ($duplicate, " .
$cgi->param('id') . ")");
}
# Now all changes to the DB have been made. It's time to email
# all concerned users, including the bug itself, but also the
# duplicated bug and dependent bugs, if any.
$vars->{'mailrecipients'} = { 'cc' => \@ccRemoved,
'owner' => $origOwner,
'qacontact' => $origQaContact,
'changer' => Bugzilla->user->login };
$vars->{'id'} = $id;
$vars->{'type'} = "bug";
# Let the user know the bug was changed and who did and didn't
# receive email about the change.
$template->process("bug/process/results.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
$vars->{'header_done'} = 1;
if ($duplicate) {
$vars->{'mailrecipients'} = { 'changer' => Bugzilla->user->login };
$vars->{'id'} = $duplicate;
$vars->{'type'} = "dupe";
# Let the user know a duplication notation was added to the original bug.
$template->process("bug/process/results.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
$vars->{'header_done'} = 1;
}
if ($check_dep_bugs) {
foreach my $k (keys(%dependencychanged)) {
$vars->{'mailrecipients'} = { 'changer' => Bugzilla->user->login };
$vars->{'id'} = $k;
$vars->{'type'} = "dep";
# Let the user (if he is able to see the bug) know we checked to see
# if we should email notice of this change to users with a relationship
# to the dependent bug and who did and didn't receive email about it.
$template->process("bug/process/results.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
$vars->{'header_done'} = 1;
}
}
}
# Determine if Patch Viewer is installed, for Diff link
# (NB: Duplicate code with show_bug.cgi.)
eval {
require PatchReader;
$vars->{'patchviewerinstalled'} = 1;
};
if (defined $cgi->param('id')) {
$action = Bugzilla->user->settings->{'post_bug_submit_action'}->{'value'};
} else {
# param('id') is not defined when changing multiple bugs
$action = 'nothing';
}
if ($action eq 'next_bug') {
my $next_bug;
my $cur = lsearch(\@bug_list, $cgi->param("id"));
if ($cur >= 0 && $cur < $#bug_list) {
$next_bug = $bug_list[$cur + 1];
}
if ($next_bug) {
if (detaint_natural($next_bug) && Bugzilla->user->can_see_bug($next_bug)) {
my $bug = new Bugzilla::Bug($next_bug, $whoid);
ThrowCodeError("bug_error", { bug => $bug }) if $bug->error;
$vars->{'bugs'} = [$bug];
$vars->{'nextbug'} = $bug->bug_id;
$template->process("bug/show.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
exit;
}
}
} elsif ($action eq 'same_bug') {
if (Bugzilla->user->can_see_bug($cgi->param('id'))) {
my $bug = new Bugzilla::Bug($cgi->param('id'), $whoid);
ThrowCodeError("bug_error", { bug => $bug }) if $bug->error;
$vars->{'bugs'} = [$bug];
$template->process("bug/show.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
exit;
}
} elsif ($action ne 'nothing') {
ThrowCodeError("invalid_post_bug_submit_action");
}
# End the response page.
$template->process("bug/navigate.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
$template->process("global/footer.html.tmpl", $vars)
|| ThrowTemplateError($template->error());