Skip to content

M
mpd
Commit d8cc7fca authored by Led's avatar Led
Browse files
Options

0.11.3-rc2

parent bdc29293
Show whitespace changes
Inline Side-by-side
Showing with 1689 additions and 853 deletions
aclocal.m4
View file @ d8cc7fca
......@@ -965,6 +965,7 @@ test -z "$pic_mode" && pic_mode=default
tagname=
AC_LIBTOOL_LANG_C_CONFIG
_LT_AC_TAGCONFIG
_LT_AC_SHARED_EXT
])# AC_LIBTOOL_SETUP
......@@ -1268,6 +1269,20 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
rm -rf conftest*
;;
*-*-linux*)
# Test if the compiler is 64bit
echo 'int i;' > conftest.$ac_ext
lt_cv_cc_64bit_output=no
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*"ELF 64"*)
lt_cv_cc_64bit_output=yes
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
......@@ -1377,7 +1392,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
teststring="ABCD"
testring="ABCD"
case $build_os in
msdosdjgpp*)
......@@ -1416,16 +1431,16 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
testring=$testring$testring
done
teststring=
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
......@@ -1821,7 +1836,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -1934,7 +1949,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -1981,6 +1996,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -1999,7 +2038,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -2082,7 +2121,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -2097,7 +2136,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -2108,7 +2147,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -2177,36 +2216,46 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
x86_64*)
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -2279,7 +2328,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -2476,6 +2525,24 @@ if test -f "$ltmain" && test -n "$tagnames"; then
fi
])# _LT_AC_TAGCONFIG
# _LT_AC_SHARED_EXT
# ----------------
AC_DEFUN([_LT_AC_SHARED_EXT],[
if test ! -f "${ofile}"; then
AC_MSG_WARN([output file `$ofile' does not exist])
fi
if test -z `grep -e 'shared_ext.*shrext' $ofile`; then
# Make sure $shared_ext gets set to $shrext
if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
mv "${ofile}T" "$ofile"
chmod +x "$ofile"
else
rm -f "${ofile}T"
AC_MSG_ERROR([unable to update shared_ext.])
fi
fi
])# _LT_AC_SHARED_EXT
# AC_LIBTOOL_DLOPEN
# -----------------
......@@ -2870,14 +2937,14 @@ bsdi4*)
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
# win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
lt_cv_file_magic_cmd='win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump'.
# win32_libid shell function, so use a weaker test based on 'objdump'.
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
......@@ -3297,7 +3364,7 @@ aix3*)
fi
;;
aix4* | aix5*)
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
......@@ -3745,7 +3812,7 @@ case $host_os in
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
......@@ -4448,7 +4515,7 @@ aix3*)
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4* | aix5*)
aix4*)
test "$enable_shared" = yes && enable_static=no
;;
esac
......@@ -4803,7 +4870,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -5911,7 +5978,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
_LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -6111,7 +6178,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -6917,7 +6984,7 @@ AC_ARG_ENABLE(oggtest, [ --disable-oggtest Do not try to compile and run
elif test "x$ogg_prefix" != "x" ; then
OGG_LIBS="-L$ogg_prefix/lib"
elif test "x$prefix" != "xNONE" ; then
OGG_LIBS="-L$libdir"
OGG_LIBS="-L$prefix/lib"
fi
OGG_LIBS="$OGG_LIBS -logg"
......@@ -6927,7 +6994,7 @@ AC_ARG_ENABLE(oggtest, [ --disable-oggtest Do not try to compile and run
elif test "x$ogg_prefix" != "x" ; then
OGG_CFLAGS="-I$ogg_prefix/include"
elif test "x$prefix" != "xNONE"; then
OGG_CFLAGS=""
OGG_CFLAGS="-I$prefix/include"
fi
AC_MSG_CHECKING(for Ogg)
......@@ -7021,7 +7088,7 @@ AC_ARG_ENABLE(vorbistest, [ --disable-vorbistest Do not try to compile an
elif test "x$vorbis_prefix" != "x" ; then
VORBIS_LIBS="-L$vorbis_prefix/lib"
elif test "x$prefix" != "xNONE"; then
VORBIS_LIBS="-L$libdir"
VORBIS_LIBS="-L$prefix/lib"
fi
VORBIS_LIBS="$VORBIS_LIBS -lvorbis -lm"
......@@ -7033,7 +7100,7 @@ AC_ARG_ENABLE(vorbistest, [ --disable-vorbistest Do not try to compile an
elif test "x$vorbis_prefix" != "x" ; then
VORBIS_CFLAGS="-I$vorbis_prefix/include"
elif test "x$prefix" != "xNONE"; then
VORBIS_CFLAGS=""
VORBIS_CFLAGS="-I$prefix/include"
fi
......
config.guess
View file @ d8cc7fca
......@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
timestamp='2003-06-17'
timestamp='2004-01-24'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
......@@ -136,13 +136,6 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
## for Red Hat Linux
if test -f /etc/redhat-release ; then
VENDOR=redhat ;
else
VENDOR= ;
fi
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
......@@ -228,6 +221,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
mvmeppc:OpenBSD:*:*)
echo powerpc-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
pegasos:OpenBSD:*:*)
echo powerpc-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
pmax:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
......@@ -314,6 +310,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:OS/390:*:*)
echo i370-ibm-openedition
exit 0 ;;
*:OS400:*:*)
echo powerpc-ibm-os400
exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
......@@ -406,6 +405,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
exit 0 ;;
m68k:machten:*:*)
echo m68k-apple-machten${UNAME_RELEASE}
exit 0 ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
exit 0 ;;
......@@ -749,6 +751,11 @@ EOF
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
5000:UNIX_System_V:4.*:*)
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
exit 0 ;;
......@@ -758,7 +765,7 @@ EOF
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
*:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
*:FreeBSD:*:*)
# Determine whether the default compiler uses glibc.
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
......@@ -770,7 +777,10 @@ EOF
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
# GNU/KFreeBSD systems have a "k" prefix to indicate we are using
# FreeBSD's kernel, but not the complete OS.
case ${LIBC} in gnu) kernel_only='k' ;; esac
echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
exit 0 ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
......@@ -803,8 +813,13 @@ EOF
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
*:GNU:*:*)
# the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
exit 0 ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit 0 ;;
......@@ -815,7 +830,7 @@ EOF
echo cris-axis-linux-gnu
exit 0 ;;
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-${VENDOR:-unknown}-linux-gnu
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
......@@ -859,10 +874,10 @@ EOF
test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
;;
ppc:Linux:*:*)
echo powerpc-${VENDOR:-unknown}-linux-gnu
echo powerpc-unknown-linux-gnu
exit 0 ;;
ppc64:Linux:*:*)
echo powerpc64-${VENDOR:-unknown}-linux-gnu
echo powerpc64-unknown-linux-gnu
exit 0 ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
......@@ -890,7 +905,7 @@ EOF
echo hppa64-unknown-linux-gnu
exit 0 ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-${VENDOR:-ibm}-linux-gnu
echo ${UNAME_MACHINE}-ibm-linux
exit 0 ;;
sh64*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
......@@ -902,7 +917,7 @@ EOF
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
x86_64:Linux:*:*)
echo x86_64-${VENDOR:-unknown}-linux-gnu
echo x86_64-unknown-linux-gnu
exit 0 ;;
i*86:Linux:*:*)
# The BFD linker knows what the default object file format is, so
......@@ -952,9 +967,12 @@ EOF
LIBC=gnuaout
#endif
#endif
#ifdef __dietlibc__
LIBC=dietlibc
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
test x"${LIBC}" != x && echo "${UNAME_MACHINE}-${VENDOR:-pc}-linux-${LIBC}" && exit 0
test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
;;
i*86:DYNIX/ptx:4*:*)
......@@ -982,6 +1000,9 @@ EOF
i*86:atheos:*:*)
echo ${UNAME_MACHINE}-unknown-atheos
exit 0 ;;
i*86:syllable:*:*)
echo ${UNAME_MACHINE}-pc-syllable
exit 0 ;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
......@@ -1053,7 +1074,7 @@ EOF
exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
......@@ -1168,7 +1189,7 @@ EOF
*:QNX:*:4*)
echo i386-pc-qnx
exit 0 ;;
NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
NSR-?:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
exit 0 ;;
*:NonStop-UX:*:*)
......@@ -1212,6 +1233,9 @@ EOF
SEI:*:*:SEIUX)
echo mips-sei-seiux${UNAME_RELEASE}
exit 0 ;;
*:DragonFly:*:*)
echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
......
config.sub
View file @ d8cc7fca
......@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
timestamp='2003-06-18'
timestamp='2004-01-05'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
......@@ -118,7 +118,8 @@ esac
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
......@@ -228,13 +229,14 @@ case $basic_machine in
| a29k \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k \
| ip2k | iq2000 \
| m32r | m68000 | m68k | m88k | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
......@@ -247,6 +249,7 @@ case $basic_machine in
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
......@@ -257,7 +260,6 @@ case $basic_machine in
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
| s390 | s390x \
| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
......@@ -305,7 +307,7 @@ case $basic_machine in
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* \
| ip2k-* | iq2000-* \
| m32r-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | mcore-* \
......@@ -320,6 +322,7 @@ case $basic_machine in
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
......@@ -330,7 +333,6 @@ case $basic_machine in
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
| s390-* | s390x-* \
| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
......@@ -378,6 +380,12 @@ case $basic_machine in
amd64)
basic_machine=x86_64-pc
;;
amd64-*)
basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
amd64-*)
basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
amdahl)
basic_machine=580-amdahl
os=-sysv
......@@ -742,6 +750,10 @@ case $basic_machine in
basic_machine=or32-unknown
os=-coff
;;
os400)
basic_machine=powerpc-ibm
os=-os400
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
......@@ -833,6 +845,12 @@ case $basic_machine in
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
s390 | s390-*)
basic_machine=s390-ibm
;;
s390x | s390x-*)
basic_machine=s390x-ibm
;;
sa29200)
basic_machine=a29k-amd
os=-udi
......@@ -956,6 +974,10 @@ case $basic_machine in
tower | tower-32)
basic_machine=m68k-ncr
;;
tpf)
basic_machine=s390x-ibm
os=-tpf
;;
udi29k)
basic_machine=a29k-amd
os=-udi
......@@ -1124,19 +1146,19 @@ case $os in
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
| -hiux* | -386bsd* | -knetbsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
| -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
| -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
......@@ -1160,6 +1182,9 @@ case $os in
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
-linux-dietlibc)
os=-linux-dietlibc
;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
......@@ -1172,6 +1197,9 @@ case $os in
-opened*)
os=-openedition
;;
-os400*)
os=-os400
;;
-wince*)
os=-wince
;;
......@@ -1193,6 +1221,9 @@ case $os in
-atheos*)
os=-atheos
;;
-syllable*)
os=-syllable
;;
-386bsd)
os=-bsd
;;
......@@ -1215,6 +1246,9 @@ case $os in
-sinix*)
os=-sysv4
;;
-tpf*)
os=-tpf
;;
-triton*)
os=-sysv3
;;
......@@ -1463,9 +1497,15 @@ case $basic_machine in
-mvs* | -opened*)
vendor=ibm
;;
-os400*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
-tpf*)
vendor=ibm
;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
......
configure
View file @ d8cc7fca
......@@ -3516,14 +3516,14 @@ bsdi4*)
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
# win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
lt_cv_file_magic_cmd='win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump'.
# win32_libid shell function, so use a weaker test based on 'objdump'.
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
......@@ -3792,6 +3792,24 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
rm -rf conftest*
;;
*-*-linux*)
# Test if the compiler is 64bit
echo 'int i;' > conftest.$ac_ext
lt_cv_cc_64bit_output=no
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
case `/usr/bin/file conftest.$ac_objext` in
*"ELF 64"*)
lt_cv_cc_64bit_output=yes
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
......@@ -5243,7 +5261,7 @@ fi
# Provide some information about the compiler.
echo "$as_me:5246:" \
echo "$as_me:5264:" \
"checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
......@@ -5398,7 +5416,7 @@ if test "${lt_cv_sys_max_cmd_len+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
i=0
teststring="ABCD"
testring="ABCD"
case $build_os in
msdosdjgpp*)
......@@ -5437,16 +5455,16 @@ else
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
testring=$testring$testring
done
teststring=
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
......@@ -6277,11 +6295,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6280: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6298: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:6284: \$? = $ac_status" >&5
echo "$as_me:6302: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -6510,11 +6528,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6513: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6531: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:6517: \$? = $ac_status" >&5
echo "$as_me:6535: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -6570,11 +6588,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6573: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6591: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:6577: \$? = $ac_status" >&5
echo "$as_me:6595: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -6786,7 +6804,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -7088,7 +7106,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -7544,7 +7562,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -7657,7 +7675,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -7704,6 +7722,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -7722,7 +7764,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -7805,7 +7847,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -7820,7 +7862,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -7831,7 +7873,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -7900,11 +7942,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 7907 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 7970 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -7913,27 +7976,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -8006,7 +8058,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -8775,7 +8827,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 8778 "configure"
#line 8830 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -8873,7 +8925,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 8876 "configure"
#line 8928 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -8998,7 +9050,7 @@ aix3*)
fi
;;
aix4* | aix5*)
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
......@@ -9274,7 +9326,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -10189,7 +10241,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
......@@ -11052,11 +11104,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:11055: $lt_compile\"" >&5)
(eval echo "\"\$as_me:11107: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:11059: \$? = $ac_status" >&5
echo "$as_me:11111: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -11112,11 +11164,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:11115: $lt_compile\"" >&5)
(eval echo "\"\$as_me:11167: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:11119: \$? = $ac_status" >&5
echo "$as_me:11171: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -11263,7 +11315,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -11376,7 +11428,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -11423,6 +11475,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -11441,7 +11517,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -11524,7 +11600,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -11539,7 +11615,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -11550,7 +11626,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -11619,11 +11695,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 11626 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 11723 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -11632,27 +11729,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -11725,7 +11811,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -12494,7 +12580,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12497 "configure"
#line 12583 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -12592,7 +12678,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12595 "configure"
#line 12681 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -12871,7 +12957,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -13193,7 +13279,7 @@ aix3*)
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4* | aix5*)
aix4*)
test "$enable_shared" = yes && enable_static=no
;;
esac
......@@ -13419,11 +13505,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:13422: $lt_compile\"" >&5)
(eval echo "\"\$as_me:13508: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:13426: \$? = $ac_status" >&5
echo "$as_me:13512: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -13479,11 +13565,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:13482: $lt_compile\"" >&5)
(eval echo "\"\$as_me:13568: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:13486: \$? = $ac_status" >&5
echo "$as_me:13572: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -13695,7 +13781,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds_F77="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -13977,7 +14063,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -14433,7 +14519,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -14546,7 +14632,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -14593,6 +14679,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -14611,7 +14721,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -14694,7 +14804,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -14709,7 +14819,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -14720,7 +14830,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -14789,11 +14899,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 14796 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 14927 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -14802,27 +14933,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -14895,7 +15015,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -15236,7 +15356,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -15534,11 +15654,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15537: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15657: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:15541: \$? = $ac_status" >&5
echo "$as_me:15661: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -15767,11 +15887,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15770: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15890: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:15774: \$? = $ac_status" >&5
echo "$as_me:15894: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -15827,11 +15947,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15830: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15950: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:15834: \$? = $ac_status" >&5
echo "$as_me:15954: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -16043,7 +16163,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds_GCJ="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -16345,7 +16465,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -16801,7 +16921,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -16914,7 +17034,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -16961,6 +17081,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -16979,7 +17123,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -17062,7 +17206,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -17077,7 +17221,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -17088,7 +17232,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -17157,11 +17301,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 17164 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 17329 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -17170,27 +17335,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -17263,7 +17417,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -18032,7 +18186,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 18035 "configure"
#line 18189 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -18130,7 +18284,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 18133 "configure"
#line 18287 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -18409,7 +18563,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -18854,7 +19008,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -19116,6 +19270,24 @@ echo "$as_me: error: unable to update list of available tagged configurations."
fi
if test ! -f "${ofile}"; then
{ echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
fi
if test -z `grep -e 'shared_ext.*shrext' $ofile`; then
# Make sure $shared_ext gets set to $shrext
if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
mv "${ofile}T" "$ofile"
chmod +x "$ofile"
else
rm -f "${ofile}T"
{ { echo "$as_me:$LINENO: error: unable to update shared_ext." >&5
echo "$as_me: error: unable to update shared_ext." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
......@@ -24272,7 +24444,7 @@ fi;
elif test "x$ogg_prefix" != "x" ; then
OGG_LIBS="-L$ogg_prefix/lib"
elif test "x$prefix" != "xNONE" ; then
OGG_LIBS="-L$libdir"
OGG_LIBS="-L$prefix/lib"
fi
OGG_LIBS="$OGG_LIBS -logg"
......@@ -24282,7 +24454,7 @@ fi;
elif test "x$ogg_prefix" != "x" ; then
OGG_CFLAGS="-I$ogg_prefix/include"
elif test "x$prefix" != "xNONE"; then
OGG_CFLAGS=""
OGG_CFLAGS="-I$prefix/include"
fi
echo "$as_me:$LINENO: checking for Ogg" >&5
......@@ -24469,7 +24641,7 @@ fi;
elif test "x$vorbis_prefix" != "x" ; then
VORBIS_LIBS="-L$vorbis_prefix/lib"
elif test "x$prefix" != "xNONE"; then
VORBIS_LIBS="-L$libdir"
VORBIS_LIBS="-L$prefix/lib"
fi
VORBIS_LIBS="$VORBIS_LIBS -lvorbis -lm"
......@@ -24481,7 +24653,7 @@ fi;
elif test "x$vorbis_prefix" != "x" ; then
VORBIS_CFLAGS="-I$vorbis_prefix/include"
elif test "x$prefix" != "xNONE"; then
VORBIS_CFLAGS=""
VORBIS_CFLAGS="-I$prefix/include"
fi
......
ltmain.sh
View file @ d8cc7fca
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
......@@ -24,32 +24,6 @@
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
basename="s,^.*/,,g"
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath="$0"
# RH: define SED for historic ltconfig's generated by Libtool 1.3
[ -z "$SED" ] && SED=sed
# The name of this program:
progname=`echo "$progpath" | $SED $basename`
modename="$progname"
# Global variables:
EXIT_SUCCESS=0
EXIT_FAILURE=1
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=1.5.6
TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)"
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
......@@ -62,7 +36,7 @@ elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
:
else
# Restart under the correct shell, and then maybe $echo will work.
exec $SHELL "$progpath" --no-reexec ${1+"$@"}
exec $SHELL "$0" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
......@@ -71,9 +45,22 @@ if test "X$1" = X--fallback-echo; then
cat <<EOF
$*
EOF
exit $EXIT_SUCCESS
exit 0
fi
# define SED for historic ltconfig's generated by Libtool 1.3
test -z "$SED" && SED=sed
# The name of this program.
progname=`$echo "$0" | ${SED} 's%^.*/%%'`
modename="$progname"
# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=1.5.2
TIMESTAMP=" (1.1220.2.60 2004/01/25 12:25:08)"
default_mode=
help="Try \`$progname --help' for more information."
magic="%%%MAGIC variable%%%"
......@@ -116,7 +103,7 @@ fi
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Global variables.
......@@ -131,17 +118,38 @@ execute_dlfiles=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
if test -z "$max_cmd_len"; then
i=0
testring="ABCD"
new_result=
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
max_cmd_len="$new_result" &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
testring="$testring$testring"
done
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
max_cmd_len=`expr $max_cmd_len \/ 2`
fi
#####################################
# Shell function definitions:
# This seems to be the best place for them
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
func_win32_libid () {
win32_libid () {
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
......@@ -150,7 +158,7 @@ func_win32_libid () {
;;
*ar\ archive*) # could be an import, or static
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
if test "X$win32_nmres" = "Ximport" ; then
......@@ -174,76 +182,9 @@ func_win32_libid () {
$echo $win32_libid_type
}
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag () {
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
CC_quoted="$CC_quoted $arg"
done
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
CC_quoted="$CC_quoted $arg"
done
case "$@ " in
" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
tagname=$z
break
;;
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
$echo "$modename: unable to infer tagged configuration"
$echo "$modename: specify a tag with \`--tag'" 1>&2
exit $EXIT_FAILURE
# else
# $echo "$modename: using $tagname tagged configuration"
fi
;;
esac
fi
}
# End of Shell function definitions
#####################################
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
# Parse our command line options once, thoroughly.
while test "$#" -gt 0
do
......@@ -269,7 +210,7 @@ do
case $tagname in
*[!-_A-Za-z0-9,/]*)
$echo "$progname: invalid tag name: $tagname" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
......@@ -279,10 +220,10 @@ do
# not specially marked.
;;
*)
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
taglist="$taglist $tagname"
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
else
$echo "$progname: ignoring unknown tag $tagname" 1>&2
fi
......@@ -311,16 +252,16 @@ do
$echo "Copyright (C) 2003 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions. There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
exit $EXIT_SUCCESS
exit 0
;;
--config)
${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
# Now print the configurations for the tags.
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
done
exit $EXIT_SUCCESS
exit 0
;;
--debug)
......@@ -345,7 +286,7 @@ do
else
$echo "disable static libraries"
fi
exit $EXIT_SUCCESS
exit 0
;;
--finish) mode="finish" ;;
......@@ -376,7 +317,7 @@ do
-*)
$echo "$modename: unrecognized option \`$arg'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
;;
*)
......@@ -389,7 +330,7 @@ done
if test -n "$prevopt"; then
$echo "$modename: option \`$prevopt' requires an argument" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# If this variable is set in any of the actions, the command in it
......@@ -445,7 +386,7 @@ if test -z "$show_help"; then
if test -n "$execute_dlfiles" && test "$mode" != execute; then
$echo "$modename: unrecognized option \`-dlopen'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Change the help message to a mode-specific one.
......@@ -487,7 +428,7 @@ if test -z "$show_help"; then
-o)
if test -n "$libobj" ; then
$echo "$modename: you cannot specify \`-o' more than once" 1>&2
exit $EXIT_FAILURE
exit 1
fi
arg_mode=target
continue
......@@ -562,11 +503,11 @@ if test -z "$show_help"; then
case $arg_mode in
arg)
$echo "$modename: you must specify an argument for -Xcompile"
exit $EXIT_FAILURE
exit 1
;;
target)
$echo "$modename: you must specify a target with \`-o'" 1>&2
exit $EXIT_FAILURE
exit 1
;;
*)
# Get the name of the library object.
......@@ -599,11 +540,50 @@ if test -z "$show_help"; then
*.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
*)
$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
func_infer_tag $base_compile
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
if test -n "$available_tags" && test -z "$tagname"; then
case $base_compile in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
case "$base_compile " in
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
tagname=$z
break
;;
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
$echo "$modename: unable to infer tagged configuration"
$echo "$modename: specify a tag with \`--tag'" 1>&2
exit 1
# else
# $echo "$modename: using $tagname tagged configuration"
fi
;;
esac
fi
for arg in $later; do
case $arg in
......@@ -636,7 +616,7 @@ if test -z "$show_help"; then
if test -z "$base_compile"; then
$echo "$modename: you must specify a compilation command" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Delete any leftover library objects.
......@@ -647,7 +627,7 @@ if test -z "$show_help"; then
fi
$run $rm $removelist
trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
trap "$run $rm $removelist; exit 1" 1 2 15
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
......@@ -666,7 +646,7 @@ if test -z "$show_help"; then
output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
removelist="$removelist $output_obj $lockfile"
trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
trap "$run $rm $removelist; exit 1" 1 2 15
else
output_obj=
need_locks=no
......@@ -676,7 +656,7 @@ if test -z "$show_help"; then
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
if test "$need_locks" = yes; then
until $run ln "$progpath" "$lockfile" 2>/dev/null; do
until $run ln "$0" "$lockfile" 2>/dev/null; do
$show "Waiting for $lockfile to be removed"
sleep 2
done
......@@ -694,7 +674,7 @@ avoid parallel builds (make -j) in this platform, or get a better
compiler."
$run $rm $removelist
exit $EXIT_FAILURE
exit 1
fi
$echo $srcfile > "$lockfile"
fi
......@@ -749,7 +729,7 @@ EOF
if $run eval "$command"; then :
else
test -n "$output_obj" && $run $rm $removelist
exit $EXIT_FAILURE
exit 1
fi
if test "$need_locks" = warn &&
......@@ -769,7 +749,7 @@ avoid parallel builds (make -j) in this platform, or get a better
compiler."
$run $rm $removelist
exit $EXIT_FAILURE
exit 1
fi
# Just move the object if needed, then go on to compile the next one
......@@ -821,7 +801,7 @@ EOF
if $run eval "$command"; then :
else
$run $rm $removelist
exit $EXIT_FAILURE
exit 1
fi
if test "$need_locks" = warn &&
......@@ -841,7 +821,7 @@ avoid parallel builds (make -j) in this platform, or get a better
compiler."
$run $rm $removelist
exit $EXIT_FAILURE
exit 1
fi
# Just move the object if needed
......@@ -879,7 +859,7 @@ EOF
$run $rm "$lockfile"
fi
exit $EXIT_SUCCESS
exit 0
;;
# libtool link mode
......@@ -951,7 +931,46 @@ EOF
vinfo=
vinfo_number=no
func_infer_tag $base_compile
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base link
# command doesn't match the default compiler.
if test -n "$available_tags" && test -z "$tagname"; then
case $base_compile in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
case $base_compile in
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
# The compiler in $compile_command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
tagname=$z
break
;;
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
$echo "$modename: unable to infer tagged configuration"
$echo "$modename: specify a tag with \`--tag'" 1>&2
exit 1
# else
# $echo "$modename: using $tagname tagged configuration"
fi
;;
esac
fi
# We need to know -static, to get the right output filenames.
for arg
......@@ -1047,7 +1066,7 @@ EOF
export_symbols="$arg"
if test ! -f "$arg"; then
$echo "$modename: symbol file \`$arg' does not exist"
exit $EXIT_FAILURE
exit 1
fi
prev=
continue
......@@ -1099,7 +1118,7 @@ EOF
test "$pic_object" = none && \
test "$non_pic_object" = none; then
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Extract subdirectory from the argument.
......@@ -1152,7 +1171,7 @@ EOF
# Only an error if not doing a dry-run.
if test -z "$run"; then
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
exit $EXIT_FAILURE
exit 1
else
# Dry-run case.
......@@ -1173,7 +1192,7 @@ EOF
done
else
$echo "$modename: link input file \`$save_arg' does not exist"
exit $EXIT_FAILURE
exit 1
fi
arg=$save_arg
prev=
......@@ -1185,7 +1204,7 @@ EOF
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
if test "$prev" = rpath; then
......@@ -1225,11 +1244,6 @@ EOF
finalize_command="$finalize_command $qarg"
continue
;;
shrext)
shrext_cmds="$arg"
prev=
continue
;;
*)
eval "$prev=\"\$arg\""
prev=
......@@ -1278,7 +1292,7 @@ EOF
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
$echo "$modename: more than one -exported-symbols argument is not allowed"
exit $EXIT_FAILURE
exit 1
fi
if test "X$arg" = "X-export-symbols"; then
prev=expsyms
......@@ -1314,7 +1328,7 @@ EOF
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
dir="$absdir"
;;
......@@ -1465,7 +1479,7 @@ EOF
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
case "$xrpath " in
......@@ -1551,6 +1565,11 @@ EOF
continue
;;
-Kthread | -mthreads | -mt | -pthread | -pthreads | -threads | -qthreaded | -kthread )
compiler_flags="$compiler_flags $arg"
continue
;;
# Some other compiler flag.
-* | +*)
# Unknown arguments in both finalize_command and compile_command need
......@@ -1588,7 +1607,7 @@ EOF
test "$pic_object" = none && \
test "$non_pic_object" = none; then
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Extract subdirectory from the argument.
......@@ -1641,7 +1660,7 @@ EOF
# Only an error if not doing a dry-run.
if test -z "$run"; then
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
exit $EXIT_FAILURE
exit 1
else
# Dry-run case.
......@@ -1708,7 +1727,7 @@ EOF
if test -n "$prev"; then
$echo "$modename: the \`$prevarg' option requires an argument" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
......@@ -1752,7 +1771,7 @@ EOF
"")
$echo "$modename: you must specify an output file" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
;;
*.$libext) linkmode=oldlib ;;
*.lo | *.$objext) linkmode=obj ;;
......@@ -1762,7 +1781,7 @@ EOF
case $host in
*cygwin* | *mingw* | *pw32*)
# don't eliminate duplications in $postdeps and $predeps
# don't eliminate duplcations in $postdeps and $predeps
duplicate_compiler_generated_deps=yes
;;
*)
......@@ -1815,7 +1834,7 @@ EOF
*.la) ;;
*)
$echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
done
......@@ -1873,7 +1892,7 @@ EOF
fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
for search_ext in .la $std_shrext .so .a; do
for search_ext in .la $shrext .so .a; do
# Search the libtool library
lib="$searchdir/lib${name}${search_ext}"
if test -f "$lib"; then
......@@ -1949,11 +1968,11 @@ EOF
fi
if test "$pass" = scan; then
deplibs="$deplib $deplibs"
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
;;
*)
$echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
......@@ -2032,14 +2051,14 @@ EOF
if test "$found" = yes || test -f "$lib"; then :
else
$echo "$modename: cannot find the library \`$lib'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Check to see that this really is a libtool archive.
if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
exit 1
fi
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
......@@ -2075,7 +2094,7 @@ EOF
if test -z "$libdir"; then
if test -z "$old_library"; then
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# It is a libtool convenience library, so add in its objects.
convenience="$convenience $ladir/$objdir/$old_library"
......@@ -2092,7 +2111,7 @@ EOF
done
elif test "$linkmode" != prog && test "$linkmode" != lib; then
$echo "$modename: \`$lib' is not a convenience library" 1>&2
exit $EXIT_FAILURE
exit 1
fi
continue
fi # $pass = conv
......@@ -2105,18 +2124,16 @@ EOF
done
if test -z "$linklib"; then
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# This library was specified with -dlopen.
if test "$pass" = dlopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
if test -z "$dlname" ||
test "$dlopen_support" != yes ||
test "$build_libtool_libs" = no; then
if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
......@@ -2165,7 +2182,7 @@ EOF
if test "$pass" = dlpreopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Prefer using a static library (so that no silly _DYNAMIC symbols
# are required to link).
......@@ -2280,8 +2297,7 @@ EOF
fi
# This is a shared library
# Warn about portability, can't link against -module's on
# some systems (darwin)
# Warn about portability, can't link against -module's on some systems (darwin)
if test "$shouldnotlink" = yes && test "$pass" = link ; then
$echo
if test "$linkmode" = prog; then
......@@ -2388,9 +2404,9 @@ EOF
case $host in
*-*-sco3.2v5* ) add_dir="-L$dir" ;;
*-*-darwin* )
# if the lib is a module then we can not link against
# it, someone is ignoring the new warnings I added
if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
# if the lib is a module then we can not link against it, someone
# is ignoring the new warnings I added
if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
$echo "** Warning, lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
$echo
......@@ -2440,7 +2456,7 @@ EOF
if test "$lib_linked" != yes; then
$echo "$modename: configuration error: unsupported hardcode properties"
exit $EXIT_FAILURE
exit 1
fi
if test -n "$add_shlibpath"; then
......@@ -2483,8 +2499,7 @@ EOF
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
if test -n "$inst_prefix_dir" &&
test -f "$inst_prefix_dir$libdir/$linklib" ; then
if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
add="$inst_prefix_dir$libdir/$linklib"
else
add="$libdir/$linklib"
......@@ -2564,8 +2579,7 @@ EOF
if test "$linkmode" = lib; then
if test -n "$dependency_libs" &&
{ test "$hardcode_into_libs" != yes ||
test "$build_old_libs" = yes ||
{ test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
test "$link_static" = yes; }; then
# Extract -R from dependency_libs
temp_deplibs=
......@@ -2622,7 +2636,7 @@ EOF
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
exit 1
fi
if test "$absdir" != "$libdir"; then
$echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
......@@ -2632,8 +2646,7 @@ EOF
depdepl=
case $host in
*-*-darwin*)
# we do not want to link against static libs,
# but need to link against shared
# we do not want to link against static libs, but need to link against shared
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
if test -n "$deplibrary_names" ; then
for tmp in $deplibrary_names ; do
......@@ -2654,6 +2667,7 @@ EOF
path="-L$path"
;;
esac
;;
-l*)
case $host in
......@@ -2675,7 +2689,7 @@ EOF
esac
case " $deplibs " in
*" $depdepl "*) ;;
*) deplibs="$depdepl $deplibs" ;;
*) deplibs="$deplibs $depdepl" ;;
esac
case " $deplibs " in
*" $path "*) ;;
......@@ -2766,8 +2780,7 @@ EOF
eval $var=\"$tmp_libs\"
done # for var
fi
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
# Last step: remove runtime libs from dependency_libs (they stay in deplibs)
tmp_libs=
for i in $dependency_libs ; do
case " $predeps $postdeps $compiler_lib_search_path " in
......@@ -2827,19 +2840,19 @@ EOF
case $outputname in
lib*)
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
eval shared_ext=\"$shrext_cmds\"
eval shared_ext=\"$shrext\"
eval libname=\"$libname_spec\"
;;
*)
if test "$module" = no; then
$echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
if test "$need_lib_prefix" != no; then
# Add the "lib" prefix for modules if required
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
eval shared_ext=\"$shrext_cmds\"
eval shared_ext=\"$shrext\"
eval libname=\"$libname_spec\"
else
libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
......@@ -2850,7 +2863,7 @@ EOF
if test -n "$objs"; then
if test "$deplibs_check_method" != pass_all; then
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
exit $EXIT_FAILURE
exit 1
else
$echo
$echo "*** Warning: Linking the shared library $output against the non-libtool"
......@@ -2898,7 +2911,7 @@ EOF
if test -n "$8"; then
$echo "$modename: too many parameters to \`-version-info'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# convert absolute version numbers to libtool ages
......@@ -2948,7 +2961,7 @@ EOF
*)
$echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
......@@ -2957,7 +2970,7 @@ EOF
*)
$echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
......@@ -2966,14 +2979,14 @@ EOF
*)
$echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
if test "$age" -gt "$current"; then
$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Calculate the version variables.
......@@ -3062,7 +3075,7 @@ EOF
*)
$echo "$modename: unknown library version type \`$version_type'" 1>&2
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
......@@ -3116,12 +3129,10 @@ EOF
*.$objext)
;;
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
if test "X$precious_files_regex" != "X"; then
if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
fi
fi
removelist="$removelist $p"
;;
*) ;;
......@@ -3369,6 +3380,13 @@ EOF
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
esac
done
# It is ok to link against an archive when
# building a shared library.
if $AR -t $potlib > /dev/null 2>&1; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
| ${SED} 10q \
| $EGREP "$file_magic_regex" > /dev/null; then
......@@ -3601,7 +3619,7 @@ EOF
fi
# Get the real and link names of the library.
eval shared_ext=\"$shrext_cmds\"
eval shared_ext=\"$shrext\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
realname="$2"
......@@ -3853,6 +3871,7 @@ EOF
save_ifs="$IFS"; IFS='~'
for cmd in $concat_cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
......@@ -3899,7 +3918,7 @@ EOF
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
exit $EXIT_SUCCESS
exit 0
fi
# Create links to the real library.
......@@ -3947,7 +3966,7 @@ EOF
*.lo)
if test -n "$objs$old_deplibs"; then
$echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
exit $EXIT_FAILURE
exit 1
fi
libobj="$output"
obj=`$echo "X$output" | $Xsed -e "$lo2o"`
......@@ -4058,7 +4077,7 @@ EOF
$run ${rm}r $gentop
fi
exit $EXIT_SUCCESS
exit 0
fi
if test "$build_libtool_libs" != yes; then
......@@ -4071,7 +4090,7 @@ EOF
# accidentally link it into a program.
# $show "echo timestamp > $libobj"
# $run eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
exit 0
fi
if test -n "$pic_flag" || test "$pic_mode" != default; then
......@@ -4094,7 +4113,7 @@ EOF
$run ${rm}r $gentop
fi
exit $EXIT_SUCCESS
exit 0
;;
prog)
......@@ -4412,7 +4431,7 @@ static const void *lt_preloaded_setup() {
;;
*)
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
else
......@@ -4500,7 +4519,7 @@ static const void *lt_preloaded_setup() {
# Link the executable and exit
$show "$link_command"
$run eval "$link_command" || exit $?
exit $EXIT_SUCCESS
exit 0
fi
if test "$hardcode_action" = relink; then
......@@ -4555,10 +4574,10 @@ static const void *lt_preloaded_setup() {
fi
# Quote $echo for shipping.
if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
case $progpath in
[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
case $0 in
[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
esac
qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
else
......@@ -4584,7 +4603,7 @@ static const void *lt_preloaded_setup() {
cwrappersource=`$echo ${objdir}/lt-${output}.c`
cwrapper=`$echo ${output}.exe`
$rm $cwrappersource $cwrapper
trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
cat > $cwrappersource <<EOF
......@@ -4793,7 +4812,7 @@ EOF
;;
esac
$rm $output
trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
trap "$rm $output; exit 1" 1 2 15
$echo > $output "\
#! $SHELL
......@@ -4893,7 +4912,7 @@ else
else
$echo \"\$relink_command_output\" >&2
$rm \"\$progdir/\$file\"
exit $EXIT_FAILURE
exit 1
fi
fi
......@@ -4955,20 +4974,20 @@ else
esac
$echo >> $output "\
\$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
exit $EXIT_FAILURE
exit 1
fi
else
# The program doesn't exist.
\$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit $EXIT_FAILURE
exit 1
fi
fi\
"
chmod +x $output
fi
exit $EXIT_SUCCESS
exit 0
;;
esac
......@@ -5150,13 +5169,11 @@ fi\
fi
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command="(cd `pwd`; $SHELL $0 $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
# Only create the output if not a dry run.
if test -z "$run"; then
for installed in no yes; do
......@@ -5174,11 +5191,48 @@ fi\
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# We do not want portage's install root ($D) present. Check only for
# this if the .la is being installed.
if test "$installed" = yes && test "$D"; then
eval mynewdependency_lib="`echo "$libdir/$name" |sed -e "s:$D::g" -e 's://:/:g'`"
else
mynewdependency_lib="$libdir/$name"
fi
# Do not add duplicates
if test "$mynewdependency_lib"; then
if test -z "`echo $newdependency_libs |grep -e "$mynewdependency_lib"`"; then
newdependency_libs="$newdependency_libs $mynewdependency_lib"
fi
fi
;;
*)
if test "$installed" = yes; then
# Rather use S=WORKDIR if our version of portage supports it.
# This is because some ebuild (gcc) do not use $S as buildroot.
if test "$PWORKDIR"; then
S="$PWORKDIR"
fi
# We do not want portage's build root ($S) present.
if test -n "`echo $deplib |grep -e "$S"`" && test "$S"; then
mynewdependency_lib=""
# We do not want portage's install root ($D) present.
elif test -n "`echo $deplib |grep -e "$D"`" && test "$D"; then
eval mynewdependency_lib="`echo "$deplib" |sed -e "s:$D::g" -e 's://:/:g'`"
else
mynewdependency_lib="$deplib"
fi
else
mynewdependency_lib="$deplib"
fi
# Do not add duplicates
if test "$mynewdependency_lib"; then
if test -z "`echo $newdependency_libs |grep -e "$mynewdependency_lib"`"; then
newdependency_libs="$newdependency_libs $mynewdependency_lib"
fi
fi
newdependency_libs="$newdependency_libs $libdir/$name"
;;
*) newdependency_libs="$newdependency_libs $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
......@@ -5188,7 +5242,7 @@ fi\
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
exit 1
fi
newdlfiles="$newdlfiles $libdir/$name"
done
......@@ -5199,7 +5253,7 @@ fi\
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit $EXIT_FAILURE
exit 1
fi
newdlprefiles="$newdlprefiles $libdir/$name"
done
......@@ -5230,6 +5284,10 @@ fi\
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
esac
# Do not add duplicates
if test "$installed" = yes && test "$D"; then
install_libdir="`echo "$install_libdir" |sed -e "s:$D::g" -e 's://:/:g'`"
fi
$echo > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
......@@ -5279,7 +5337,7 @@ relink_command=\"$relink_command\""
$run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
;;
esac
exit $EXIT_SUCCESS
exit 0
;;
# libtool install mode
......@@ -5368,13 +5426,13 @@ relink_command=\"$relink_command\""
if test -z "$install_prog"; then
$echo "$modename: you must specify an install program" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
if test -n "$prev"; then
$echo "$modename: the \`$prev' option requires an argument" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
if test -z "$files"; then
......@@ -5384,7 +5442,7 @@ relink_command=\"$relink_command\""
$echo "$modename: you must specify a destination" 1>&2
fi
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Strip any trailing slash from the destination.
......@@ -5405,7 +5463,7 @@ relink_command=\"$relink_command\""
if test "$#" -gt 2; then
$echo "$modename: \`$dest' is not a directory" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
fi
case $destdir in
......@@ -5417,7 +5475,7 @@ relink_command=\"$relink_command\""
*)
$echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
done
......@@ -5446,7 +5504,7 @@ relink_command=\"$relink_command\""
else
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
library_names=
......@@ -5488,7 +5546,7 @@ relink_command=\"$relink_command\""
# but it's something to keep an eye on.
if test "$inst_prefix_dir" = "$destdir"; then
$echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
exit $EXIT_FAILURE
exit 1
fi
if test -n "$inst_prefix_dir"; then
......@@ -5503,7 +5561,7 @@ relink_command=\"$relink_command\""
if $run eval "$relink_command"; then :
else
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
exit $EXIT_FAILURE
exit 1
fi
fi
......@@ -5582,7 +5640,7 @@ relink_command=\"$relink_command\""
*)
$echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
......@@ -5600,7 +5658,7 @@ relink_command=\"$relink_command\""
$show "$install_prog $staticobj $staticdest"
$run eval "$install_prog \$staticobj \$staticdest" || exit $?
fi
exit $EXIT_SUCCESS
exit 0
;;
*)
......@@ -5654,7 +5712,7 @@ relink_command=\"$relink_command\""
# Check the variables that should have been set.
if test -z "$notinst_deplibs"; then
$echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
finalize=yes
......@@ -5695,12 +5753,8 @@ relink_command=\"$relink_command\""
tmpdir="/tmp"
test -n "$TMPDIR" && tmpdir="$TMPDIR"
tmpdir="$tmpdir/libtool-$$"
save_umask=`umask`
umask 0077
if $mkdir "$tmpdir"; then
umask $save_umask
if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then :
else
umask $save_umask
$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
continue
fi
......@@ -5783,9 +5837,9 @@ relink_command=\"$relink_command\""
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
test -n "$run" && current_libdirs=" -n$current_libdirs"
exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
exec_cmd='$SHELL $0 $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
exit 0
fi
;;
......@@ -5825,7 +5879,7 @@ relink_command=\"$relink_command\""
fi
# Exit here if they wanted silent mode.
test "$show" = : && exit $EXIT_SUCCESS
test "$show" = : && exit 0
$echo "----------------------------------------------------------------------"
$echo "Libraries have been installed in:"
......@@ -5861,7 +5915,7 @@ relink_command=\"$relink_command\""
$echo "See any operating system documentation about shared libraries for"
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
$echo "----------------------------------------------------------------------"
exit $EXIT_SUCCESS
exit 0
;;
# libtool execute mode
......@@ -5873,7 +5927,7 @@ relink_command=\"$relink_command\""
if test -z "$cmd"; then
$echo "$modename: you must specify a COMMAND" 1>&2
$echo "$help"
exit $EXIT_FAILURE
exit 1
fi
# Handle -dlopen flags immediately.
......@@ -5881,7 +5935,7 @@ relink_command=\"$relink_command\""
if test ! -f "$file"; then
$echo "$modename: \`$file' is not a file" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
dir=
......@@ -5892,7 +5946,7 @@ relink_command=\"$relink_command\""
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
# Read the libtool library.
......@@ -5919,7 +5973,7 @@ relink_command=\"$relink_command\""
dir="$dir/$objdir"
else
$echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
exit $EXIT_FAILURE
exit 1
fi
;;
......@@ -5999,7 +6053,7 @@ relink_command=\"$relink_command\""
$echo "export $shlibpath_var"
fi
$echo "$cmd$args"
exit $EXIT_SUCCESS
exit 0
fi
;;
......@@ -6027,7 +6081,7 @@ relink_command=\"$relink_command\""
if test -z "$rm"; then
$echo "$modename: you must specify an RM program" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
rmdirs=
......@@ -6186,20 +6240,20 @@ relink_command=\"$relink_command\""
"")
$echo "$modename: you must specify a MODE" 1>&2
$echo "$generic_help" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
if test -z "$exec_cmd"; then
$echo "$modename: invalid operation mode \`$mode'" 1>&2
$echo "$generic_help" 1>&2
exit $EXIT_FAILURE
exit 1
fi
fi # test -z "$show_help"
if test -n "$exec_cmd"; then
eval exec $exec_cmd
exit $EXIT_FAILURE
exit 1
fi
# We need to display help for each of the modes.
......@@ -6235,7 +6289,7 @@ MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
a more detailed description of MODE.
Report bugs to <bug-libtool@gnu.org>."
exit $EXIT_SUCCESS
exit 0
;;
clean)
......@@ -6390,14 +6444,14 @@ Otherwise, only FILE itself is deleted using RM."
*)
$echo "$modename: invalid operation mode \`$mode'" 1>&2
$echo "$help" 1>&2
exit $EXIT_FAILURE
exit 1
;;
esac
$echo
$echo "Try \`$modename --help' for more information about other modes."
exit $EXIT_SUCCESS
exit 0
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
......
src/libid3tag/aclocal.m4
View file @ d8cc7fca
......@@ -1043,6 +1043,7 @@ test -z "$pic_mode" && pic_mode=default
tagname=
AC_LIBTOOL_LANG_C_CONFIG
_LT_AC_TAGCONFIG
_LT_AC_SHARED_EXT
])# AC_LIBTOOL_SETUP
......@@ -1346,6 +1347,20 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
rm -rf conftest*
;;
*-*-linux*)
# Test if the compiler is 64bit
echo 'int i;' > conftest.$ac_ext
lt_cv_cc_64bit_output=no
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*"ELF 64"*)
lt_cv_cc_64bit_output=yes
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
......@@ -1455,7 +1470,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
teststring="ABCD"
testring="ABCD"
case $build_os in
msdosdjgpp*)
......@@ -1494,16 +1509,16 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
testring=$testring$testring
done
teststring=
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
......@@ -1899,7 +1914,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -2012,7 +2027,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -2059,6 +2074,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -2077,7 +2116,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -2160,7 +2199,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -2175,7 +2214,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -2186,7 +2225,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -2255,36 +2294,46 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
x86_64*)
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -2357,7 +2406,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -2554,6 +2603,24 @@ if test -f "$ltmain" && test -n "$tagnames"; then
fi
])# _LT_AC_TAGCONFIG
# _LT_AC_SHARED_EXT
# ----------------
AC_DEFUN([_LT_AC_SHARED_EXT],[
if test ! -f "${ofile}"; then
AC_MSG_WARN([output file `$ofile' does not exist])
fi
if test -z `grep -e 'shared_ext.*shrext' $ofile`; then
# Make sure $shared_ext gets set to $shrext
if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
mv "${ofile}T" "$ofile"
chmod +x "$ofile"
else
rm -f "${ofile}T"
AC_MSG_ERROR([unable to update shared_ext.])
fi
fi
])# _LT_AC_SHARED_EXT
# AC_LIBTOOL_DLOPEN
# -----------------
......@@ -2948,14 +3015,14 @@ bsdi4*)
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
# win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
lt_cv_file_magic_cmd='win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump'.
# win32_libid shell function, so use a weaker test based on 'objdump'.
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
......@@ -3375,7 +3442,7 @@ aix3*)
fi
;;
aix4* | aix5*)
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
......@@ -3823,7 +3890,7 @@ case $host_os in
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
......@@ -4526,7 +4593,7 @@ aix3*)
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4* | aix5*)
aix4*)
test "$enable_shared" = yes && enable_static=no
;;
esac
......@@ -4881,7 +4948,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -5989,7 +6056,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
_LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -6189,7 +6256,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......
src/libid3tag/configure
View file @ d8cc7fca
......@@ -3412,14 +3412,14 @@ bsdi4*)
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
# win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
lt_cv_file_magic_cmd='win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump'.
# win32_libid shell function, so use a weaker test based on 'objdump'.
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
......@@ -3688,6 +3688,24 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
rm -rf conftest*
;;
*-*-linux*)
# Test if the compiler is 64bit
echo 'int i;' > conftest.$ac_ext
lt_cv_cc_64bit_output=no
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
case `/usr/bin/file conftest.$ac_objext` in
*"ELF 64"*)
lt_cv_cc_64bit_output=yes
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
......@@ -5139,7 +5157,7 @@ fi
# Provide some information about the compiler.
echo "$as_me:5142:" \
echo "$as_me:5160:" \
"checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
......@@ -5294,7 +5312,7 @@ if test "${lt_cv_sys_max_cmd_len+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
i=0
teststring="ABCD"
testring="ABCD"
case $build_os in
msdosdjgpp*)
......@@ -5333,16 +5351,16 @@ else
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
testring=$testring$testring
done
teststring=
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
......@@ -6173,11 +6191,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6176: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6194: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:6180: \$? = $ac_status" >&5
echo "$as_me:6198: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -6406,11 +6424,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6409: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6427: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:6413: \$? = $ac_status" >&5
echo "$as_me:6431: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -6466,11 +6484,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6469: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6487: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:6473: \$? = $ac_status" >&5
echo "$as_me:6491: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -6682,7 +6700,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -6984,7 +7002,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -7440,7 +7458,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -7553,7 +7571,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -7600,6 +7618,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -7618,7 +7660,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -7701,7 +7743,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -7716,7 +7758,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -7727,7 +7769,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -7796,11 +7838,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 7803 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 7866 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -7809,27 +7872,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -7902,7 +7954,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -8671,7 +8723,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 8674 "configure"
#line 8726 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -8769,7 +8821,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 8772 "configure"
#line 8824 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -8894,7 +8946,7 @@ aix3*)
fi
;;
aix4* | aix5*)
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
......@@ -9170,7 +9222,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -10085,7 +10137,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
......@@ -10948,11 +11000,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:10951: $lt_compile\"" >&5)
(eval echo "\"\$as_me:11003: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:10955: \$? = $ac_status" >&5
echo "$as_me:11007: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -11008,11 +11060,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:11011: $lt_compile\"" >&5)
(eval echo "\"\$as_me:11063: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:11015: \$? = $ac_status" >&5
echo "$as_me:11067: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -11159,7 +11211,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -11272,7 +11324,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -11319,6 +11371,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -11337,7 +11413,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -11420,7 +11496,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -11435,7 +11511,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -11446,7 +11522,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -11515,11 +11591,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 11522 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 11619 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -11528,27 +11625,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -11621,7 +11707,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -12390,7 +12476,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12393 "configure"
#line 12479 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -12488,7 +12574,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12491 "configure"
#line 12577 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -12767,7 +12853,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -13089,7 +13175,7 @@ aix3*)
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4* | aix5*)
aix4*)
test "$enable_shared" = yes && enable_static=no
;;
esac
......@@ -13315,11 +13401,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:13318: $lt_compile\"" >&5)
(eval echo "\"\$as_me:13404: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:13322: \$? = $ac_status" >&5
echo "$as_me:13408: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -13375,11 +13461,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:13378: $lt_compile\"" >&5)
(eval echo "\"\$as_me:13464: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:13382: \$? = $ac_status" >&5
echo "$as_me:13468: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -13591,7 +13677,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds_F77="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -13873,7 +13959,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -14329,7 +14415,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -14442,7 +14528,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -14489,6 +14575,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -14507,7 +14617,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -14590,7 +14700,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -14605,7 +14715,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -14616,7 +14726,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -14685,11 +14795,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 14692 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 14823 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -14698,27 +14829,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -14791,7 +14911,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -15132,7 +15252,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -15430,11 +15550,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15433: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15553: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:15437: \$? = $ac_status" >&5
echo "$as_me:15557: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -15663,11 +15783,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15666: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15786: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:15670: \$? = $ac_status" >&5
echo "$as_me:15790: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -15723,11 +15843,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15726: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15846: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:15730: \$? = $ac_status" >&5
echo "$as_me:15850: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -15939,7 +16059,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds_GCJ="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -16241,7 +16361,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -16697,7 +16817,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -16810,7 +16930,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -16857,6 +16977,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -16875,7 +17019,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -16958,7 +17102,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -16973,7 +17117,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -16984,7 +17128,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -17053,11 +17197,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 17060 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 17225 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -17066,27 +17231,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -17159,7 +17313,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -17928,7 +18082,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 17931 "configure"
#line 18085 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -18026,7 +18180,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 18029 "configure"
#line 18183 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -18305,7 +18459,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -18750,7 +18904,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -19012,6 +19166,24 @@ echo "$as_me: error: unable to update list of available tagged configurations."
fi
if test ! -f "${ofile}"; then
{ echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
fi
if test -z `grep -e 'shared_ext.*shrext' $ofile`; then
# Make sure $shared_ext gets set to $shrext
if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
mv "${ofile}T" "$ofile"
chmod +x "$ofile"
else
rm -f "${ofile}T"
{ { echo "$as_me:$LINENO: error: unable to update shared_ext." >&5
echo "$as_me: error: unable to update shared_ext." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
......
src/libmad/aclocal.m4
View file @ d8cc7fca
......@@ -1075,6 +1075,7 @@ test -z "$pic_mode" && pic_mode=default
tagname=
AC_LIBTOOL_LANG_C_CONFIG
_LT_AC_TAGCONFIG
_LT_AC_SHARED_EXT
])# AC_LIBTOOL_SETUP
......@@ -1378,6 +1379,20 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
rm -rf conftest*
;;
*-*-linux*)
# Test if the compiler is 64bit
echo 'int i;' > conftest.$ac_ext
lt_cv_cc_64bit_output=no
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*"ELF 64"*)
lt_cv_cc_64bit_output=yes
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
......@@ -1487,7 +1502,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
teststring="ABCD"
testring="ABCD"
case $build_os in
msdosdjgpp*)
......@@ -1526,16 +1541,16 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
testring=$testring$testring
done
teststring=
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
......@@ -1931,7 +1946,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -2044,7 +2059,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -2091,6 +2106,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -2109,7 +2148,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -2192,7 +2231,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -2207,7 +2246,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -2218,7 +2257,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -2287,36 +2326,46 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
x86_64*)
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -2389,7 +2438,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -2586,6 +2635,24 @@ if test -f "$ltmain" && test -n "$tagnames"; then
fi
])# _LT_AC_TAGCONFIG
# _LT_AC_SHARED_EXT
# ----------------
AC_DEFUN([_LT_AC_SHARED_EXT],[
if test ! -f "${ofile}"; then
AC_MSG_WARN([output file `$ofile' does not exist])
fi
if test -z `grep -e 'shared_ext.*shrext' $ofile`; then
# Make sure $shared_ext gets set to $shrext
if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
mv "${ofile}T" "$ofile"
chmod +x "$ofile"
else
rm -f "${ofile}T"
AC_MSG_ERROR([unable to update shared_ext.])
fi
fi
])# _LT_AC_SHARED_EXT
# AC_LIBTOOL_DLOPEN
# -----------------
......@@ -2980,14 +3047,14 @@ bsdi4*)
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
# win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
lt_cv_file_magic_cmd='win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump'.
# win32_libid shell function, so use a weaker test based on 'objdump'.
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
......@@ -3407,7 +3474,7 @@ aix3*)
fi
;;
aix4* | aix5*)
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
......@@ -3855,7 +3922,7 @@ case $host_os in
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
......@@ -4558,7 +4625,7 @@ aix3*)
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4* | aix5*)
aix4*)
test "$enable_shared" = yes && enable_static=no
;;
esac
......@@ -4913,7 +4980,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -6021,7 +6088,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
_LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -6221,7 +6288,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......
src/libmad/configure
View file @ d8cc7fca
......@@ -3427,14 +3427,14 @@ bsdi4*)
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
# win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
lt_cv_file_magic_cmd='win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump'.
# win32_libid shell function, so use a weaker test based on 'objdump'.
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
......@@ -3703,6 +3703,24 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
rm -rf conftest*
;;
*-*-linux*)
# Test if the compiler is 64bit
echo 'int i;' > conftest.$ac_ext
lt_cv_cc_64bit_output=no
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
case `/usr/bin/file conftest.$ac_objext` in
*"ELF 64"*)
lt_cv_cc_64bit_output=yes
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
......@@ -5154,7 +5172,7 @@ fi
# Provide some information about the compiler.
echo "$as_me:5157:" \
echo "$as_me:5175:" \
"checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
......@@ -5309,7 +5327,7 @@ if test "${lt_cv_sys_max_cmd_len+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
i=0
teststring="ABCD"
testring="ABCD"
case $build_os in
msdosdjgpp*)
......@@ -5348,16 +5366,16 @@ else
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
testring=$testring$testring
done
teststring=
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
......@@ -6188,11 +6206,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6191: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6209: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:6195: \$? = $ac_status" >&5
echo "$as_me:6213: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -6421,11 +6439,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6424: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6442: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:6428: \$? = $ac_status" >&5
echo "$as_me:6446: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -6481,11 +6499,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:6484: $lt_compile\"" >&5)
(eval echo "\"\$as_me:6502: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:6488: \$? = $ac_status" >&5
echo "$as_me:6506: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -6697,7 +6715,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -6999,7 +7017,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -7455,7 +7473,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -7568,7 +7586,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -7615,6 +7633,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -7633,7 +7675,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -7716,7 +7758,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -7731,7 +7773,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -7742,7 +7784,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -7811,11 +7853,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 7818 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 7881 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -7824,27 +7887,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -7917,7 +7969,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -8686,7 +8738,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 8689 "configure"
#line 8741 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -8784,7 +8836,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 8787 "configure"
#line 8839 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -8909,7 +8961,7 @@ aix3*)
fi
;;
aix4* | aix5*)
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
......@@ -9185,7 +9237,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -10100,7 +10152,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
......@@ -10963,11 +11015,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:10966: $lt_compile\"" >&5)
(eval echo "\"\$as_me:11018: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:10970: \$? = $ac_status" >&5
echo "$as_me:11022: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -11023,11 +11075,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:11026: $lt_compile\"" >&5)
(eval echo "\"\$as_me:11078: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:11030: \$? = $ac_status" >&5
echo "$as_me:11082: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -11174,7 +11226,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -11287,7 +11339,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -11334,6 +11386,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -11352,7 +11428,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -11435,7 +11511,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -11450,7 +11526,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -11461,7 +11537,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -11530,11 +11606,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 11537 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 11634 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -11543,27 +11640,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -11636,7 +11722,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -12405,7 +12491,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12408 "configure"
#line 12494 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -12503,7 +12589,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12506 "configure"
#line 12592 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -12782,7 +12868,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -13104,7 +13190,7 @@ aix3*)
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4* | aix5*)
aix4*)
test "$enable_shared" = yes && enable_static=no
;;
esac
......@@ -13330,11 +13416,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:13333: $lt_compile\"" >&5)
(eval echo "\"\$as_me:13419: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:13337: \$? = $ac_status" >&5
echo "$as_me:13423: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -13390,11 +13476,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:13393: $lt_compile\"" >&5)
(eval echo "\"\$as_me:13479: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:13397: \$? = $ac_status" >&5
echo "$as_me:13483: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -13606,7 +13692,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds_F77="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -13888,7 +13974,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -14344,7 +14430,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -14457,7 +14543,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -14504,6 +14590,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -14522,7 +14632,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -14605,7 +14715,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -14620,7 +14730,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -14631,7 +14741,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -14700,11 +14810,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 14707 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 14838 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -14713,27 +14844,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -14806,7 +14926,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -15147,7 +15267,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -15445,11 +15565,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15448: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15568: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:15452: \$? = $ac_status" >&5
echo "$as_me:15572: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -15678,11 +15798,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15681: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15801: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:15685: \$? = $ac_status" >&5
echo "$as_me:15805: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
......@@ -15738,11 +15858,11 @@ else
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:15741: $lt_compile\"" >&5)
(eval echo "\"\$as_me:15861: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:15745: \$? = $ac_status" >&5
echo "$as_me:15865: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
......@@ -15954,7 +16074,7 @@ EOF
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_cmds_GCJ="$tmp_archive_cmds"
supports_anon_versioning=no
......@@ -16256,7 +16376,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
......@@ -16712,7 +16832,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
......@@ -16825,7 +16945,7 @@ bsdi4*)
cygwin* | mingw* | pw32*)
version_type=windows
shrext_cmds=".dll"
shrext=".dll"
need_version=no
need_lib_prefix=no
......@@ -16872,6 +16992,30 @@ cygwin* | mingw* | pw32*)
esac
;;
linux*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
supports_anon_versioning=no
case `$LD -v 2>/dev/null` in
*\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
if test $supports_anon_versioning = yes; then
archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
else
$archive_expsym_cmds="$archive_cmds"
fi
else
ld_shlibs=no
fi
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
......@@ -16890,7 +17034,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
......@@ -16973,7 +17117,7 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
......@@ -16988,7 +17132,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
......@@ -16999,7 +17143,7 @@ hpux9* | hpux10* | hpux11*)
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
......@@ -17068,11 +17212,32 @@ linux*)
# before this can be enabled.
hardcode_into_libs=yes
# find out which ABI we are using
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
fi
case $host_cpu:$lt_cv_cc_64bit_output in
powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
;;
esac
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
# Find out which ABI we are using (multilib Linux x86_64 hack).
libsuff=
case "$host_cpu" in
x86_64*|s390x*|powerpc64*)
echo '#line 17075 "configure"' > conftest.$ac_ext
x86_64*)
echo '#line 17240 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
......@@ -17081,27 +17246,16 @@ linux*)
case `/usr/bin/file conftest.$ac_objext` in
*64-bit*)
libsuff=64
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
esac
fi
rm -rf conftest*
;;
*)
;;
esac
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
......@@ -17174,7 +17328,7 @@ openbsd*)
os2*)
libname_spec='$name'
shrext_cmds=".dll"
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
......@@ -17943,7 +18097,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 17946 "configure"
#line 18100 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -18041,7 +18195,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 18044 "configure"
#line 18198 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -18320,7 +18474,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -18765,7 +18919,7 @@ objext="$ac_objext"
libext="$libext"
# Shared library suffix (normally ".so").
shrext_cmds='$shrext_cmds'
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
......@@ -19027,6 +19181,24 @@ echo "$as_me: error: unable to update list of available tagged configurations."
fi
if test ! -f "${ofile}"; then
{ echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
fi
if test -z `grep -e 'shared_ext.*shrext' $ofile`; then
# Make sure $shared_ext gets set to $shrext
if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
mv "${ofile}T" "$ofile"
chmod +x "$ofile"
else
rm -f "${ofile}T"
{ { echo "$as_me:$LINENO: error: unable to update shared_ext." >&5
echo "$as_me: error: unable to update shared_ext." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
......
src/libmad/mad.h
View file @ d8cc7fca
......@@ -24,12 +24,12 @@
extern "C" {
# endif
# define FPM_INTEL
# define FPM_DEFAULT
# define SIZEOF_INT 4
# define SIZEOF_LONG 4
# define SIZEOF_LONG 8
# define SIZEOF_LONG_LONG 8
......
src/path.c
View file @ d8cc7fca
......@@ -27,6 +27,7 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <errno.h>
#ifdef HAVE_LOCALE
#ifdef HAVE_LANGINFO_CODESET
......@@ -116,11 +117,11 @@ void initPaths(char * playlistDirArg, char * musicDirArg) {
playlistDir = prependCwdToPathDup(playlistDirArg);
if((stat(playlistDir,&st))<0) {
ERROR("problem stat'ing \"%s\"\n",playlistDirArg);
ERROR("problem stat'ing \"%s\": %s\n", playlistDirArg, strerror(errno));
exit(EXIT_FAILURE);
}
if(!S_ISDIR(st.st_mode)) {
ERROR("\"%s\" is not a directory\n",playlistDirArg);
ERROR("\"%s\" is not a directory: %s\n", playlistDirArg, strerror(errno));
exit(EXIT_FAILURE);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment