CLEANUP_LIVE_PACKAGES to CLEANUP_BASE_PACKAGES

This reverts commit e65b5cff.

interactivesystem sisyphus-alt25 do not dependency of mingetty.
sysvinit systems do not work without mingetty.

interactivesystem sisyphus-alt25 do not dependency of e2fsprogs.

With this we break luks support for the old use/live/install.

live can be used also as an installer or rescue.
For altinst and rescue is nothing changes.

Broken and obsoleted by control sudowheel.
See: https://git.altlinux.org/tasks/archive/done/_315/323161/

Fix https://bugzilla.altlinux.org/40802

The image and the installed system may have kernels with different KFLAVOUR.

This one fixes the "cooler goes off during installation"
10.2rc problem on multi-CPU e8c2 motherboards that follows
misinitialization of sensor drivers (lacking i2c mux init
_before_ them) and subsequent misreading of zero degree
temperature for CPUs (would need no cooling if it was true).

See-also: mcst#8627
Suggested-by: mcst.ru folks
Tested-by: elbrus.ru folks

It only makes sense on engineering samples of .404 board,
and 201-PC is .480 with only a single 4X PCIe gen3 slot
that needs riser to get a reasonable videocard connected
(manual multiseat setup is a minor hurdle it seems).

We don't do ship vivante drivers since p9_e2k
as those behaved erratically with gtk+3 at least
(and were a major PITA to handle in the first place,
and nobody asked in the end: folks just needed 2D+Xv);
so no sense to bring extra noise into installation.

See the .318-01 related story in a nearby pkg.in commit.

e2kv4 with mga2  is e1cp (Elbrus-1C+);
e2kv6 with mga25 is e2c3 (Elbrus-2C3).

xorg driver is the same.

e1cp and e2c3 have tricky GPU driver modules that can misinit
given the lack of other modules they don't directly depend on;
let's provide softdep lists so that the prereqs do get loaded.

See-also: mcst#8098

The problem is with indirect module initialization dependencies
(the infamous "Driver probe function unexpectedly returned 256"
error when loading the module from initrd and not full rootfs);
let's provide modprobe with a hint.
Suggested-by: Vitaly Chikunov <vt@altlinux.org>
See-also: mcst#8089
See-also: mcst#8392

...accordingly to the package getting renamed.

201-PC has been developed using .404 motherboards
(IIRC using the two middle PCIe slots for GPUs);
1601-PC one has been done with .466 motherboard
by sciberia.io guys who have outrun me at that!

It's actually set within the corresponding apt-conf
but referring to that here is better than tossing
REPO=http/pvt all over the make runs.

It should do some work: nothing else might have pulled use/x11 in
(which brings another topic to the table: we'd probably better
have some platform-independent targets that pull archdep pieces in
under the hood).

Fixes: 2002e625

Looks like it can get stuck for quite some time on serial ports
that are present and might be occupied by other processes already.

NB: the missing modules break image build,
    avoid mga2/galcore/vivante by default
    (absent in some CPU-specific kernels).

At the first boot, if there is no network, the wrong time is set,
since the timezone and utc settings occur late.
So at least with the default parameters there will be no problem.

This is an alternative for 80rescue.cfg

Since we check for the presence of a theme before enabling it in
the grub config, it is enough to issue a warning.

GRUB since 93a786a00 (kern/efi/sb: Enforce verification of font files)
has enforced verification of font files in secure boot mode. In order
to continue to be able to load some default fonts, they are added to
the built-in memdisk bundled with a signed EFI image and may be
accessed by file name prior the actual default path.

This kernel is best supported for armh.