defparams.pl

# -*- Mode: perl; indent-tabs-mode: nil -*-
#
# The contents of this file are subject to the Mozilla Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code is the Bugzilla Bug Tracking System.
#
# The Initial Developer of the Original Code is Netscape Communications
# Corporation. Portions created by Netscape are
# Copyright (C) 1998 Netscape Communications Corporation. All
# Rights Reserved.
#
# Contributor(s): Terry Weissman <terry@mozilla.org>
#                 Dawn Endico <endico@mozilla.org>
#                 Dan Mosedale <dmose@mozilla.org>
#                 Joe Robins <jmrobins@tgix.com>
#                 Jake <jake@acutex.net>
#

# This file defines all the parameters that we have a GUI to edit within
# Bugzilla.

# ATTENTION!!!!   THIS FILE ONLY CONTAINS THE DEFAULTS.
# You cannot change your live settings by editing this file.
# Only adding new parameters is done here.  Once the parameter exists, you 
# must use %baseurl%/editparams.cgi from the web to edit the settings.

use diagnostics;
use strict;

# Shut up misguided -w warnings about "used only once".  For some reason,
# "use vars" chokes on me when I try it here.

sub bug_form_pl_sillyness {
    my $zz;
    $zz = %::param_checker;
    $zz = %::param_desc;
    $zz = %::param_type;
}

sub WriteParams {
    foreach my $i (@::param_list) {
	if (!defined $::param{$i}) {
	    $::param{$i} = $::param_default{$i};
            if (!defined $::param{$i}) {
                die "No default parameter ever specified for $i";
            }
	}
    }
    mkdir("data", 0777);
    chmod 0777, "data";
    my $tmpname = "data/params.$$";
    open(FID, ">$tmpname") || die "Can't create $tmpname";
    my $v = $::param{'version'};
    delete $::param{'version'};  # Don't write the version number out to
                                # the params file.
    print FID GenerateCode('%::param');
    $::param{'version'} = $v;
    print FID "1;\n";
    close FID;
    rename $tmpname, "data/params" || die "Can't rename $tmpname to data/params";
    chmod 0666, "data/params";
}
    

sub DefParam {
    my ($id, $desc, $type, $default, $checker) = (@_);
    push @::param_list, $id;
    $::param_desc{$id} = $desc;
    $::param_type{$id} = $type;
    $::param_default{$id} = $default;
    if (defined $checker) {
	$::param_checker{$id} = $checker;
    }
}


sub check_numeric {
    my ($value) = (@_);
    if ($value !~ /^[0-9]+$/) {
	return "must be a numeric value";
    }
    return "";
}
    
sub check_shadowdb {
    my ($value) = (@_);
    $value = trim($value);
    if ($value eq "") {
        return "";
    }
    SendSQL("SHOW DATABASES");
    while (MoreSQLData()) {
        my $n = FetchOneColumn();
        if (lc($n) eq lc($value)) {
            return "The $n database already exists.  If that's really the name you want to use for the backup, please CAREFULLY make the existing database go away somehow, and then try again.";
        }
    }
    SendSQL("CREATE DATABASE $value");
    SendSQL("INSERT INTO shadowlog (command) VALUES ('SYNCUP')", 1);
    return "";
}

@::param_list = ();



# OK, here are the definitions themselves.
#
# The type of parameters (the third parameter to DefParam) can be one
# of the following:
#
# t -- A short text entry field (suitable for a single line)
# l -- A long text field (suitable for many lines)
# b -- A boolean value (either 1 or 0)

DefParam("maintainer",
	 "The email address of the person who maintains this installation of Bugzilla.",
	 "t",
         'THE MAINTAINER HAS NOT YET BEEN SET');

DefParam("urlbase",
	 "The URL that is the common initial leading part of all Bugzilla URLs.",
	 "t",
	 "http://cvs-mirror.mozilla.org/webtools/bugzilla/",
	 \&check_urlbase);

sub check_urlbase {
    my ($url) = (@_);
    if ($url !~ m:^http.*/$:) {
	return "must be a legal URL, that starts with http and ends with a slash.";
    }
    return "";
}

DefParam("preferlists",
	"If this is on, Bugzilla will display most selection options as selection lists. If this is off, Bugzilla will use radio buttons and checkboxes instead.",
	"b",
	1);

DefParam("capitalizelists",
	"If this is on, Bugzilla will capitalize list entries, checkboxes, and radio buttons. If this is off, Bugzilla will leave these items untouched.",
	"b",
	0);


DefParam("usequip",
	"If this is on, Bugzilla displays a silly quip at the beginning of buglists, and lets users add to the list of quips.",
	"b",
	1);

# Added parameter - JMR, 2/16/00
DefParam("usebuggroups",
         "If this is on, Bugzilla will associate a bug group with each product in the database, and use it for querying bugs.",
         "b",
         0); 

# Added parameter - JMR, 2/16/00
DefParam("usebuggroupsentry",
         "If this is on, Bugzilla will use product bug groups to restrict who can enter bugs.  Requires usebuggroups to be on as well.",
         "b",
         0); 

DefParam("shadowdb",
         "If non-empty, then this is the name of another database in which Bugzilla will keep a shadow read-only copy of everything.  This is done so that long slow read-only operations can be used against this db, and not lock up things for everyone else.  Turning on this parameter will create the given database; be careful not to use the name of an existing database with useful data in it!",
         "t",
         "",
         \&check_shadowdb);

DefParam("queryagainstshadowdb",
         "If this is on, and the shadowdb is set, then queries will happen against the shadow database.",
         "b",
         0);
         

DefParam("usedespot",
         "If this is on, then we are using the Despot system to control our database of users.  Bugzilla won't ever write into the user database, it will let the Despot code maintain that.  And Bugzilla will send the user over to Despot URLs if they need to change their password.  Also, in that case, Bugzilla will treat the passwords stored in the database as being crypt'd, not plaintext.",
         "b",
         0);

DefParam("despotbaseurl",
         "The base URL for despot.  Used only if <b>usedespot</b> is turned on, above.",
         "t",
         "http://cvs-mirror.mozilla.org/webtools/despot/despot.cgi",
         \&check_despotbaseurl);


sub check_despotbaseurl {
    my ($url) = (@_);
    if ($url !~ /^http.*cgi$/) {
	return "must be a legal URL, that starts with http and ends with .cgi";
    }
    return "";
}


# Adding in four parameters for LDAP authentication.  -JMR, 7/28/00
DefParam("useLDAP",
         "Turn this on to use an LDAP directory for user authentication ".
         "instead of the Bugzilla database.  (User profiles will still be ".
         "stored in the database, and will match against the LDAP user by ".
         "email address.)",
         "b",
         0);


DefParam("LDAPserver",
         "The name (and optionally port) of your LDAP server. (e.g. ldap.company.com, or ldap.company.com:portnum)",
         "t",
         "");


DefParam("LDAPBaseDN",
         "The BaseDN for authenticating users against. (e.g. \"ou=People,o=Company\")",
         "t",
         "");


DefParam("LDAPmailattribute",
         "The name of the attribute of a user in your directory that ".
         "contains the email address.",
         "t",
         "mail");
#End of LDAP parameters


DefParam("headerhtml",
         "Additional HTML to add to the HEAD area of documents, eg. links to stylesheets.",
         "l",
         '');

DefParam("bodyhtml",
         "Additional parameters to add to the BODY tag at the beginning of documents, eg. background image/colors, link colors, etc",
         "l",
         'BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000EE" VLINK="#551A8B" ALINK="#FF0000"');

DefParam("footerhtml",
         "HTML to add to the bottom of every page. By default it displays the blurbhtml, and %commandmenu%, a menu of useful commands.  You probably really want either headerhtml or footerhtml to include %commandmenu%.",
         "l",
         '<TABLE BORDER="0"><TR><TD BGCOLOR="#000000" VALIGN="TOP">
<TABLE BORDER="0" CELLPADDING="10" CELLSPACING="0" WIDTH="100%" BGCOLOR="lightyellow">
<TR><TD>
%blurbhtml%
<BR>
%commandmenu%
</TD></TR></TABLE></TD></TR></TABLE>');

DefParam("errorhtml",
         "This is what is printed out when a form is improperly filled out.  %errormsg% is replaced by the actual error itself; %<i>anythingelse</i>% gets replaced by the definition of that parameter (as defined on this page).",
         "l",
         qq{<TABLE CELLPADDING=20><TR><TD BGCOLOR="#ff0000">
<FONT SIZE="+2">%errormsg%</FONT></TD></TR></TABLE>
<P>Please press <B>Back</B> and try again.<P>});



DefParam("bannerhtml",
         "The html that gets emitted at the head of every Bugzilla page. 
Anything of the form %<i>word</i>% gets replaced by the defintion of that 
word (as defined on this page).",
         "l",
         q{<TABLE BGCOLOR="#000000" WIDTH="100%" BORDER=0 CELLPADDING=0 CELLSPACING=0>
<TR><TD><A HREF="http://www.mozilla.org/"><IMG
 SRC="http://www.mozilla.org/images/mozilla-banner.gif" ALT=""
BORDER=0 WIDTH=600 HEIGHT=58></A></TD></TR></TABLE>
<CENTER><FONT SIZE=-1>Bugzilla version %version%
</FONT></CENTER>});

DefParam("blurbhtml",
         "A blurb that appears as part of the header of every Bugzilla page.  This is a place to put brief warnings, pointers to one or two related pages, etc.",
         "l",
         "This is <B>Bugzilla</B>: the Mozilla bug system.  For more 
information about what Bugzilla is and what it can do, see 
<A HREF=\"http://www.mozilla.org/\">mozilla.org</A>'s
<A HREF=\"http://www.mozilla.org/bugs/\"><B>bug pages</B></A>.");


DefParam("mostfreqhtml",
         "The HTML which appears at the top of the list of most-frequently-reported bugs. Use it to explain the page, set a maintainer etc.",
         "l",
         q{
<br><p>

<b>What are "most frequent bugs"?</b>

<blockquote>The Most Frequent Bugs page lists the known open bugs which 
are reported most frequently in recent builds of Mozilla. It is automatically
generated from the Bugzilla database every 24 hours, by counting the number
of direct and indirect duplicates of bugs.
This information is provided in order to assist in minimizing
the amount of duplicate bugs entered into Bugzilla which in turn cuts down
on development time.
</blockquote>

<b>How do I use this list?</b>

<ul>
<li>Review the most frequent bugs list.</li>
<li>If problem is listed:</li>

<ul>
<li>Click on Bug # link to confirm that you have found the same bug and comment
if you have additional information. Or move on with your testing
of the product.</li>
</ul>

<li>If problem not listed:</li>

<ul>
<li>Go to the <a href="query.cgi">Bugzilla Query/Search</a>
page to try and locate a similar bug that has already been written.</li>
<li>If you find your bug in Bugzilla, feel free to comment with any new or
additional data you may have.</li>
<li>If you cannot find your problem already documented in Bugzilla, go to the
<a href="http://www.mozilla.org/quality/help/bug-form.html">Bugzilla Helper</a> and post a new bug.</li>
</ul>

</ul>
<br>
});

DefParam("mostfreqthreshold",
         "The minimum number of duplicates a bug needs to show up on the <A HREF=\"duplicates.cgi\">most frequently reported bugs page</a>. If you have a large database and this page takes a long time to load, try increasing this number.",
         "t",
         "2");

DefParam("mybugstemplate",
         "This is the URL to use to bring up a simple 'all of my bugs' list for a user.  %userid% will get replaced with the login name of a user.",
         "t",
         "buglist.cgi?bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=%userid%&emailtype1=exact&emailassigned_to1=1&emailreporter1=1");
    


DefParam("shutdownhtml",
         "If this field is non-empty, then Bugzilla will be completely disabled and this text will be displayed instead of all the Bugzilla pages.",
         "l",
         "");

DefParam("sendmailnow",
         "If this is on, Bugzilla will tell sendmail to send any e-mail immediately. If you have a large number of users with a large amount of e-mail traffic, enabling this option may dramatically slow down Bugzilla. Best used for smaller installations of Bugzilla.",
         "b",
         0);

DefParam("passwordmail",
q{The email that gets sent to people to tell them their password.  Within
this text, %mailaddress% gets replaced by the person's email address,
%login% gets replaced by the person's login (usually the same thing), and
%password% gets replaced by their password.  %<i>anythingelse</i>% gets
replaced by the definition of that parameter (as defined on this page).},
         "l",
         q{From: bugzilla-daemon
To: %mailaddress%
Subject: Your Bugzilla password.

To use the wonders of Bugzilla, you can use the following:

 E-mail address: %login%
       Password: %password%

 To change your password, go to:
 %urlbase%userprefs.cgi
});


DefParam("newchangedmail",
q{The email that gets sent to people when a bug changes.  Within this
text, %to% gets replaced with the e-mail address of the person recieving
the mail.  %bugid% gets replaced by the bug number.  %diffs% gets
replaced with what's changed.  %neworchanged% is "New:" if this mail is
reporting a new bug or empty if changes were made to an existing one.
%summary% gets replaced by the summary of this bug. %reasonsheader% 
is replaced by an abbreviated list of reasons why the user is getting the email,
suitable for use in an email header (such as X-Bugzilla-Reason).
%reasonsbody% is replaced by text that explains why the user is getting the email 
in more user friendly text than %reasonsheader%.
%<i>anythingelse</i>% gets replaced by the definition of 
that parameter (as defined on this
page).},
         "l",
"From: bugzilla-daemon
To: %to%
Subject: [Bug %bugid%] %neworchanged%%summary%
X-Bugzilla-Reason: %reasonsheader%

%urlbase%show_bug.cgi?id=%bugid%

%diffs%



%reasonsbody%");



DefParam("whinedays",
         "The number of days that we'll let a bug sit untouched in a NEW state before our cronjob will whine at the owner.",
         "t",
         7,
         \&check_numeric);


DefParam("whinemail",
         "The email that gets sent to anyone who has a NEW bug that hasn't been touched for more than <b>whinedays</b>.  Within this text, %email% gets replaced by the offender's email address.  %userid% gets replaced by the offender's bugzilla login (which, in most installations, is the same as the email address.)  %<i>anythingelse</i>% gets replaced by the definition of that parameter (as defined on this page).<p> It is a good idea to make sure this message has a valid From: address, so that if the mail bounces, a real person can know that there are bugs assigned to an invalid address.",
         "l",
         q{From: %maintainer%
To: %email%
Subject: Your Bugzilla buglist needs attention.

[This e-mail has been automatically generated.]

You have one or more bugs assigned to you in the Bugzilla 
bugsystem (%urlbase%) that require
attention.

All of these bugs are in the NEW state, and have not been touched
in %whinedays% days or more.  You need to take a look at them, and 
decide on an initial action.

Generally, this means one of three things:

(1) You decide this bug is really quick to deal with (like, it's INVALID),
    and so you get rid of it immediately.
(2) You decide the bug doesn't belong to you, and you reassign it to someone
    else.  (Hint: if you don't know who to reassign it to, make sure that
    the Component field seems reasonable, and then use the "Reassign bug to
    owner of selected component" option.)
(3) You decide the bug belongs to you, but you can't solve it this moment.
    Just use the "Accept bug" command.

To get a list of all NEW bugs, you can use this URL (bookmark it if you like!):

    %urlbase%buglist.cgi?bug_status=NEW&assigned_to=%userid%

Or, you can use the general query page, at
%urlbase%query.cgi.

Appended below are the individual URLs to get to all of your NEW bugs that 
haven't been touched for a week or more.

You will get this message once a day until you've dealt with these bugs!

});



DefParam("defaultquery",
 	 "This is the default query that initially comes up when you submit a bug.  It's in URL parameter format, which makes it hard to read.  Sorry!",
	 "t",
	 "bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&order=%22Importance%22");


DefParam("letsubmitterchoosepriority",
         "If this is on, then people submitting bugs can choose an initial priority for that bug.  If off, then all bugs initially have the default priority selected below.",
         "b",
         1);


sub check_priority {
    my ($value) = (@_);
    GetVersionTable();
    if (lsearch(\@::legal_priority, $value) < 0) {
        return "Must be a legal priority value: one of " .
            join(", ", @::legal_priority);
    }
    return "";
}

DefParam("defaultpriority",
         "This is the priority that newly entered bugs are set to.",
         "t",
         "P2",
         \&check_priority);


DefParam("usetargetmilestone",
	 "Do you wish to use the Target Milestone field?",
	 "b",
	 0);

DefParam("nummilestones",
         "If using Target Milestone, how many milestones do you wish to
          appear?",
         "t",
         10,
         \&check_numeric);

DefParam("curmilestone",
         "If using Target Milestone, Which milestone are we working toward right now?",
         "t",
         1,
         \&check_numeric);

DefParam("musthavemilestoneonaccept",
         "If you are using Target Milestone, do you want to require that the milestone be set in order for a user to ACCEPT a bug?",
         "b",
         0);

DefParam("useqacontact",
	 "Do you wish to use the QA Contact field?",
	 "b",
	 0);

DefParam("usestatuswhiteboard",
	 "Do you wish to use the Status Whiteboard field?",
	 "b",
	 0);

DefParam("usebrowserinfo",
	 "Do you want bug reports to be assigned an OS & Platform based on the browser
	  the user makes the report from?",
	 "b",
	 1);

DefParam("usedependencies",
         "Do you wish to use dependencies (allowing you to mark which bugs depend on which other ones)?",
         "b",
         1);

DefParam("webdotbase",
         "This is the URL prefix that is common to all requests for webdot.  The <a href=\"http://www.research.att.com/~north/cgi-bin/webdot.cgi\">webdot package</a> is a very swell thing that generates pictures of graphs.  If you have an installation of bugsplat that hides behind a firewall, then to get graphs to work, you will have to install a copy of webdot behind your firewall, and change this path to match.  Also, webdot has some trouble with software domain names, so you may have to play games and hack the %urlbase% part of this.  If this all seems like too much trouble, you can set this paramater to be the empty string, which will cause the graphing feature to be disabled entirely.",
         "t",
         "http://www.research.att.com/~north/cgi-bin/webdot.cgi/%urlbase%");

DefParam("entryheaderhtml",
         "This is a special header for the bug entry page. The text will be printed after the page header, before the bug entry form. It is meant to be a place to put pointers to intructions on how to enter bugs.",
         "l",
         '<A HREF="bugwritinghelp.html">Bug writing guidelines</A>');

DefParam("expectbigqueries",
         "If this is on, then we will tell mysql to <tt>set option SQL_BIG_TABLES=1</tt> before doing queries on bugs.  This will be a little slower, but one will not get the error <tt>The table ### is full</tt> for big queries that require a big temporary table.",
         "b",
         0);

DefParam("emailregexp",
         'This defines the regexp to use for legal email addresses.  The default tries to match fully qualified email addresses.  Another popular value to put here is <tt>^[^@]*$</tt>, which means "local usernames, no @ allowed.',
         "t",
         q:^[^@]*@[^@]*\\.[^@]*$:);

DefParam("emailregexpdesc",
         "This describes in english words what kinds of legal addresses are allowed by the <tt>emailregexp</tt> param.",
         "l",
         "A legal address must contain exactly one '\@', and at least one '.' after the \@.");

DefParam("emailsuffix",
         "This is a string to append to any email addresses when actually sending mail to that address.  It is useful if you have changed the <tt>emailregexp</tt> param to only allow local usernames, but you want the mail to be delivered to username\@my.local.hostname.",
         "t",
         "");


DefParam("voteremovedmail",
q{This is a mail message to send to anyone who gets a vote removed from a bug for any reason.  %to% gets replaced by the person who used to be voting for this bug.  %bugid% gets replaced by the bug number.  %reason% gets replaced by a short reason describing why the vote(s) were removed.  %votesremoved%, %votesold% and %votesnew% is the number of votes removed, before and after respectively.  %votesremovedtext%, %votesoldtext% and %votesnewtext% are these as sentences, eg "You had 2 votes on this bug."  %count% is also supported for backwards compatibility.  %<i>anythingelse</i>% gets replaced by the definition of that parameter (as defined on this page).},
         "l",
"From: bugzilla-daemon
To: %to%
Subject: [Bug %bugid%] Some or all of your votes have been removed.

Some or all of your votes have been removed from bug %bugid%.

%votesoldtext%

%votesnewtext%

Reason: %reason%

%urlbase%show_bug.cgi?id=%bugid%
");
         
DefParam("allowbugdeletion",
         q{The pages to edit products and components and versions can delete all associated bugs when you delete a product (or component or version).  Since that is a pretty scary idea, you have to turn on this option before any such deletions will ever happen.},
         "b",
         0);


DefParam("allowuserdeletion",
         q{The pages to edit users can also let you delete a user.  But there is no code that goes and cleans up any references to that user in other tables, so such deletions are kinda scary.  So, you have to turn on this option before any such deletions will ever happen.},
         "b",
         0);


DefParam("strictvaluechecks",
         "Do stricter integrity checking on both form submission values and values read in from the database.",
         "b",
         0);


DefParam("browserbugmessage",
         "If strictvaluechecks is on, and the bugzilla gets unexpected data from the browser, in addition to displaying the cause of the problem, it will output this HTML as well.",
         "l",
         "this may indicate a bug in your browser.\n");

#
# Parameters to force users to comment their changes for different actions.
DefParam("commentonaccept", 
         "If this option is on, the user needs to enter a short comment if he accepts the bug",
         "b", 0 );
DefParam("commentonclearresolution", 
         "If this option is on, the user needs to enter a short comment if the bugs resolution is cleared",
         "b", 0 );
DefParam("commentonconfirm", 
         "If this option is on, the user needs to enter a short comment when confirming a bug",
         "b", 0 );
DefParam("commentonresolve", 
         "If this option is on, the user needs to enter a short comment if the bug is resolved",
         "b", 0 );
DefParam("commentonreassign", 
         "If this option is on, the user needs to enter a short comment if the bug is reassigned",
         "b", 0 );
DefParam("commentonreassignbycomponent", 
         "If this option is on, the user needs to enter a short comment if the bug is reassigned by component",
         "b", 0 );
DefParam("commentonreopen", 
         "If this option is on, the user needs to enter a short comment if the bug is reopened",
         "b", 0 );
DefParam("commentonverify", 
         "If this option is on, the user needs to enter a short comment if the bug is verified",
         "b", 0 );
DefParam("commentonclose", 
         "If this option is on, the user needs to enter a short comment if the bug is closed",
         "b", 0 );
DefParam("commentonduplicate",
         "If this option is on, the user needs to enter a short comment if the bug is marked as duplicate",
         "b", 0 );
DefParam("supportwatchers",
         "Support one user watching (ie getting copies of all related email" .
         " about) another's bugs.  Useful for people going on vacation, and" .
         " QA folks watching particular developers' bugs",
         "b", 0 );


DefParam("move-enabled",
         "If this is on, Bugzilla will allow certain people to move bugs to the defined database.",
         "b",
	 0);
DefParam("move-button-text",
         "The text written on the Move button. Explain where the bug is being moved to.",
         "t",
         'Move To Bugscape');
DefParam("move-to-url",
         "The URL of the database we allow some of our bugs to be moved to.",
         "t",
         '');
DefParam("move-to-address",
         "To move bugs, an email is sent to the target database. This is the email address that database
          uses to listen for incoming bugs.",
         "t",
         'bugzilla-import');
DefParam("moved-from-address",
         "To move bugs, an email is sent to the target database. This is the email address from which
          this mail, and error messages are sent.",
         "t",
         'bugzilla-admin');
DefParam("movers",
         "A list of people with permission to move bugs and reopen moved bugs (in case the move operation fails).",
         "t",
         '');
DefParam("moved-default-product",
         "Bugs moved from other databases to here are assigned to this product.",
         "t",
         '');
DefParam("moved-default-component",
         "Bugs moved from other databases to here are assigned to this component.",
         "t",
         '');

DefParam("useattachmenttracker",
         "Whether or not to use the attachment tracker that adds additional features for tracking bug attachments.",
         "b",
         0);

1;